We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM sticks, bare chips, no heat spreaders

NEMIX RAM

NEMIX RAM 256GB (4×64GB) DDR5 4800 CL40 ECC RDIMM SuperMicro Server Memory Upgrade

SKU CH-TGJ0-SKGQE

256 GB kit of four 64 GB DDR5 4800 CL40 ECC registered DIMMs at 1.1 V for SuperMicro servers

  • Capacity256GB (4 x 64GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB kit (4 × 64 GB) scales server memory capacity
  • DDR5 4800 MT/s delivers high bandwidth for GPU workloads
  • ECC registered design protects data integrity in critical tasks
  • 10 V operation reduces power draw per module
  • Validated for SuperMicro SYS-821GE-TNHR, SYS-821GV-TNR, SYS-421GE-TNRT

256 GB DDR5-4800 ECC RDIMM Kit

This kit delivers 256 GB of registered ECC DDR5 memory across four 64 GB modules running at 4800 MT/s with CL40 latency. It is built for SuperMicro GPU SuperServer platforms such as the SYS-821GE-TNHR, SYS-821GV-TNR and SYS-421GE-TNRT where maximum capacity and error correction are required.

Registered ECC with 2Rx4 organisation

The modules use a 2Rx4 layout and registered buffering to reduce electrical load on the memory controller, allowing all four DIMMs to operate reliably at the rated 1.10 V. ECC circuitry detects and corrects single-bit errors, protecting data integrity in continuous workloads.

Four 64 GB modules fill four slots

Populating four DIMM slots provides 256 GB total capacity, suitable for large virtual-machine fleets, in-memory databases and GPU-accelerated compute. Systems needing more memory than four slots can supply must use higher-density DIMMs or a different platform.

Highlights

  • 256 GB kit (4 × 64 GB) scales server memory capacity
  • DDR5 4800 MT/s delivers high bandwidth for GPU workloads
  • ECC registered design protects data integrity in critical tasks
  • 10 V operation reduces power draw per module
  • Validated for SuperMicro SYS-821GE-TNHR, SYS-821GV-TNR, SYS-421GE-TNRT

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K4
Capacity256GB (4 x 64GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (4X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Will the 288-pin DDR5 RDIMM modules require any periodic reseating or cleaning in a SuperMicro server?

No reseating or cleaning is required; the registered ECC modules are solid-state components with no moving parts and no heat spreader to trap dust.

What limits sustained throughput first — the CL40 latency or the DDR5 4800 bus speed?

The DDR5 4800 (PC5-38400) bus speed is the primary throughput ceiling; CL40 latency affects response time, not peak bandwidth.

How much heat and power does the 256 GB kit draw when running continuously at 1.1 V?

Each 64 GB module operates at 1.10 V with no heat spreader, so total power draw stays low and passive chassis airflow is sufficient for all-day operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.