We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 256GB (4X64GB) DDR5 4800 CL40 2Rx4 1.1V ECC RDIMM Dell XE9640 memory upgrade

SKU CH-0G7G-F2JN9

Four-module kit adds 256 GB of DDR5 4800 ECC registered memory to Dell PowerEdge XE9640 servers

  • Capacity256GB (4 x 64GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity from four 64 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM design for data integrity
  • 2Rx4 dual-rank organisation with CL40 latency
  • 1 V low-voltage operation on 288-pin DDR5 form factor

256GB DDR5 ECC RDIMM kit for Dell PowerEdge XE9640

This 256GB kit contains four 64GB DDR5 4800 registered DIMMs with ECC and a CL40 latency. It is built for the Dell PowerEdge XE9640 server and operates at 1.1V using 2Rx4 organization. The modules use major OEM DRAM from Samsung, Micron or Hynix.

Verify Dell PowerEdge XE9640 memory population rules

Confirm that your Dell PowerEdge XE9640 supports 256GB of DDR5 4800 registered ECC memory in a four-DIMM configuration. Check the system manual for approved population sequences, maximum capacity per channel and any BIOS version requirements before installing this kit.

Kit delivers matched quad-channel set

The package supplies four identical 64GB modules tested together for stability under load. This matched quad-channel kit simplifies installation and helps maintain signal integrity across all populated slots. The supplier backs the modules with a lifetime replacement guarantee.

Highlights

  • 256 GB total capacity from four 64 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM design for data integrity
  • 2Rx4 dual-rank organisation with CL40 latency
  • 1 V low-voltage operation on 288-pin DDR5 form factor

Specifications

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K4
Capacity256GB (4 x 64GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (4X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does the 256 GB kit include all four 64 GB modules or do I need to buy extra sticks?

The package contains four 64 GB RDIMMs giving 256 GB total; no additional modules are required.

Should I choose the 256 GB 4×64 GB CL40 kit or a different capacity for my Dell PowerEdge XE9640?

This 4×64 GB CL40 kit matches the XE9640’s validated configuration; select it when you need the full 256 GB capacity.

What does the DDR5 4800 CL40 rating deliver once installed in the XE9640?

The memory runs at 4800 MT/s with CAS latency 40 at 1.10 V, providing registered ECC stability for the server workload.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.