We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules in static bags

NEMIX RAM

NEMIX RAM 256GB (4x64GB) DDR5 5600 CL46 ECC RDIMM SuperMicro B13DET memory upgrade

SKU CH-4F8N-6B9ZS

A 256 GB DDR5 ECC registered memory kit of four 64 GB modules running at 5600 MHz CL46 and 1.1 V for SuperMicro B13DET servers

  • Capacity256GB (4 x 64GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity across four 64 GB modules
  • DDR5 5600 speed with CL46 latency for server workloads
  • ECC registered RDIMM design protects data integrity
  • 10 V operation reduces power draw under load
  • Validated for SuperMicro B13DET motherboard compatibility

256 GB DDR5 ECC RDIMM kit

This NEMIX RAM kit supplies 256 GB of DDR5 ECC registered memory in four 64 GB modules. It is built for servers and workstations that require error-correcting, registered DIMMs for data integrity under sustained loads.

Suited for SuperMicro B13DET platforms

The modules are validated for the SuperMicro B13DET motherboard and operate at DDR5 5600 with CL46 latency at 1.10 V. Systems that need unbuffered non-ECC DIMMs, lower capacities, or a different pin count should consider other memory types.

Fits 288-pin DDR5 RDIMM slots

Each stick uses the standard 288-pin DDR5 RDIMM form factor and runs at the JEDEC 1.10 V level. The registered design places light electrical load on the memory controller, leaving headroom for full population of all compatible slots on the target board.

Highlights

  • 256 GB total capacity across four 64 GB modules
  • DDR5 5600 speed with CL46 latency for server workloads
  • ECC registered RDIMM design protects data integrity
  • 10 V operation reduces power draw under load
  • Validated for SuperMicro B13DET motherboard compatibility

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR44800-924K4
Capacity256GB (4 x 64GB)
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (4X64GB) DDR5 5600MHZ PC5-44800 2Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does the SuperMicro B13DET motherboard need four empty DDR5 RDIMM slots to install this 256GB kit?

Yes, the kit contains four 64GB modules and each one occupies a single 288-pin DDR5 RDIMM slot on the board.

Will the CL46 timing of these 5600MHz modules slow down existing DDR5 4800MHz RDIMMs already installed in the same server?

The memory controller will run all populated slots at the lowest common speed, so 4800MHz modules will keep their native timing while the new modules operate at 4800MHz instead of 5600MHz.

How can I confirm the full 256GB is detected and ECC is active after installing the four modules?

Check the system BIOS or UEFI memory information screen; it should show 256GB total capacity and report ECC enabled for each 64GB RDIMM.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.