SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00497677BTC
In stock
NEMIX RAM
NEMIX RAM 256GB (4x64GB) DDR5 5600 ECC Registered RDIMM CL46 1.1V for Supermicro H13SSF
A 256 GB kit of four 64 GB DDR5 5600 registered ECC RDIMMs tuned for the Supermicro H13SSF
- Capacity256GB (4 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 256 GB capacity from four 64 GB modules enables dense server workloads
- DDR5 5600 speed with CL46 timing delivers rated throughput for Supermicro H13SSF
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 1 V operation matches the board's memory controller specification exactly
- 288-pin RDIMM form factor fits the required motherboard slots without adapters
Supermicro H13SSF 256GB DDR5 Kit
This NEMIX RAM kit delivers 256GB across four 64GB DDR5 5600 Registered ECC RDIMMs built for the Supermicro H13SSF motherboard. The modules run at CL46 with a 1.1V operating voltage and a 2Rx4 rank configuration. Registered buffering and on-die ECC protect data integrity in fully populated server channels.
Suited for H13SSF capacity upgrades
Administrators expanding a Supermicro H13SSF to its maximum supported memory will find the exact rank, voltage and timing the board expects. Builders using UDIMM or SODIMM slots, or boards that require different speeds or ranks, must select memory matched to those platforms instead.
Verified fitment replaces guesswork
The kit is validated for the H13SSF memory-population rules so every slot initialises at the rated 5600 MT/s without manual tuning. No heat spreaders are included and no software utilities accompany the modules; installation follows the motherboard manual’s DIMM sequence.
Highlights
- 256 GB capacity from four 64 GB modules enables dense server workloads
- DDR5 5600 speed with CL46 timing delivers rated throughput for Supermicro H13SSF
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 1 V operation matches the board's memory controller specification exactly
- 288-pin RDIMM form factor fits the required motherboard slots without adapters
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-924K4 |
| Capacity | 256GB (4 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 4X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
What motherboard and memory architecture must I already have for this 256GB DDR5 5600 ECC Registered RDIMM kit to work?
You need a Supermicro H13SSF motherboard with DDR5 RDIMM slots that support 2Rx4 Registered ECC modules at 1.1V and CL46 timing, and the board must allow four DIMMs populated.
How do these 2Rx4 DDR5 5600 CL46 RDIMMs behave alongside older DDR5 RDIMMs I might keep in the same server?
Mixing different ranks, speeds, or CAS latencies can force the memory controller to downclock all modules to the lowest common setting and may prevent full 256GB recognition.
How can I verify the kit is running at its rated DDR5 5600 CL46 1.1V after installation?
Enter the BIOS or use a hardware inventory tool to confirm all four 64GB modules show as 5600 MT/s, CAS 46, 1.1V, Registered ECC, and 2Rx4 organization.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
