我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 256GB (4x64GB) DDR5 5600 ECC Registered RDIMM CL46 1.1V for Supermicro H13SSF

SKU CH-Y6XB-SSGMH

A 256 GB kit of four 64 GB DDR5 5600 registered ECC RDIMMs tuned for the Supermicro H13SSF

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 256 GB capacity from four 64 GB modules enables dense server workloads
  • DDR5 5600 speed with CL46 timing delivers rated throughput for Supermicro H13SSF
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the board's memory controller specification exactly
  • 288-pin RDIMM form factor fits the required motherboard slots without adapters

Supermicro H13SSF 256GB DDR5 Kit

This NEMIX RAM kit delivers 256GB across four 64GB DDR5 5600 Registered ECC RDIMMs built for the Supermicro H13SSF motherboard. The modules run at CL46 with a 1.1V operating voltage and a 2Rx4 rank configuration. Registered buffering and on-die ECC protect data integrity in fully populated server channels.

Suited for H13SSF capacity upgrades

Administrators expanding a Supermicro H13SSF to its maximum supported memory will find the exact rank, voltage and timing the board expects. Builders using UDIMM or SODIMM slots, or boards that require different speeds or ranks, must select memory matched to those platforms instead.

Verified fitment replaces guesswork

The kit is validated for the H13SSF memory-population rules so every slot initialises at the rated 5600 MT/s without manual tuning. No heat spreaders are included and no software utilities accompany the modules; installation follows the motherboard manual’s DIMM sequence.

商品特色

  • 256 GB capacity from four 64 GB modules enables dense server workloads
  • DDR5 5600 speed with CL46 timing delivers rated throughput for Supermicro H13SSF
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the board's memory controller specification exactly
  • 288-pin RDIMM form factor fits the required motherboard slots without adapters

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

商品問答

What motherboard and memory architecture must I already have for this 256GB DDR5 5600 ECC Registered RDIMM kit to work?

You need a Supermicro H13SSF motherboard with DDR5 RDIMM slots that support 2Rx4 Registered ECC modules at 1.1V and CL46 timing, and the board must allow four DIMMs populated.

How do these 2Rx4 DDR5 5600 CL46 RDIMMs behave alongside older DDR5 RDIMMs I might keep in the same server?

Mixing different ranks, speeds, or CAS latencies can force the memory controller to downclock all modules to the lowest common setting and may prevent full 256GB recognition.

How can I verify the kit is running at its rated DDR5 5600 CL46 1.1V after installation?

Enter the BIOS or use a hardware inventory tool to confirm all four 64GB modules show as 5600 MT/s, CAS 46, 1.1V, Registered ECC, and 2Rx4 organization.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。