We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 256GB (8×32GB) DDR5 4800 CL40 2Rx8 ECC RDIMM for Dell PowerEdge XR5610 memory upgrade

SKU CH-CZNK-B268N

Eight 32 GB DDR5 ECC registered DIMMs totalling 256 GB at 4800 MT/s CL40 for Dell PowerEdge XR5610 servers

  • Capacity256GB (8 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity from eight 32 GB modules
  • DDR5 4800 speed with PC5-38400 bandwidth for server workloads
  • ECC registered design detects and corrects data errors automatically
  • 1 V operation reduces power draw in dense configurations
  • Validated for Dell PowerEdge XR5610 rack server compatibility

Dell PowerEdge XR5610 Memory Upgrade

This 256GB kit contains eight 32GB DDR5 RDIMM modules built for the Dell PowerEdge XR5610 rack server. Each module runs at 4800MHz with CL40 latency and 1.1V operation. ECC and registered buffering protect data integrity in mission-critical workloads.

Replacing Slower or Smaller DDR5 Kits

The jump is worth it when the XR5610 needs maximum registered ECC capacity at the platform's native 4800MHz speed. Filling all eight slots with 2Rx8 32GB modules delivers 256GB total without downclocking. Buyers who need more than 256GB cannot use this kit.

DDR5 4800 Registered ECC Limits

DDR5 4800 is the rated ceiling for this registered ECC configuration on the XR5610. The 288-pin RDIMM form factor and 1.1V voltage are fixed by the server's memory controller. Systems requiring higher frequencies, unbuffered DIMMs, or non-ECC operation cannot use these modules.

Highlights

  • 256 GB total capacity from eight 32 GB modules
  • DDR5 4800 speed with PC5-38400 bandwidth for server workloads
  • ECC registered design detects and corrects data errors automatically
  • 1 V operation reduces power draw in dense configurations
  • Validated for Dell PowerEdge XR5610 rack server compatibility

Specifications

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-324K8
Capacity256GB (8 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (8X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does this kit use 288-pin DDR5 RDIMM modules that fit the Dell PowerEdge XR5610 memory slots?

Yes, the kit contains eight 32 GB DDR5 RDIMM modules with a 288-pin connector, matching the slot type used in the PowerEdge XR5610.

How should the eight 2Rx8 modules be populated across the server's memory channels, and which step is commonly missed?

Follow the Dell PowerEdge XR5610 service manual for the correct channel population order; the step often missed is enabling ECC and registered mode in the BIOS after installation.

When should the ECC RDIMM modules be replaced if correctable error counts begin to rise?

Monitor the system management logs for increasing correctable ECC errors; plan replacement when the error rate trends upward to avoid uncorrectable failures.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.