We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 256GB (8x32GB) DDR5 4800 CL40 1.1V ECC RDIMM memory upgrade

SKU CH-B4NF-XX3QK

Eight 32 GB DDR5 modules deliver 256 GB of registered ECC memory at 4800 MT/s with CL40 latency for Supermicro FatTwin and SuperServer systems

  • Capacity256GB (8 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB kit (8 × 32 GB) maximises server capacity
  • DDR5 4800 MT/s (PC5-38400) delivers high throughput
  • ECC registered RDIMM protects data integrity
  • 10 V operation reduces power draw
  • Validated for Supermicro FatTwin SYS-F521E3-RTB and SYS-F511E2-RT

Compatible SuperMicro Server Memory Kit

This 256GB kit contains eight 32GB DDR5 RDIMM modules built for SuperMicro FatTwin and SuperServer systems including SYS-F521E3-RTB, SYS-F511E2-RT and X13SEFR-A. ECC registered operation protects data integrity in mission-critical workloads.

Registered 288-Pin Design Without Heat Spreaders

Each module uses a 288-pin DDR5 RDIMM form factor with 1Rx4 organisation and no heat spreader, allowing dense population in 1U and 2U chassis where vertical clearance is tight. Registered buffering reduces electrical load on the memory controller for stable operation at full capacity.

Low-Voltage DDR5 At 4800 MT/s CL40

The kit runs at 1.10V with a CAS latency of 40, delivering PC5-38400 bandwidth while keeping power draw and thermals modest in typical server deployments. ECC correction and registered signalling maintain reliability under sustained load without active cooling on the modules themselves.

Highlights

  • 256 GB kit (8 × 32 GB) maximises server capacity
  • DDR5 4800 MT/s (PC5-38400) delivers high throughput
  • ECC registered RDIMM protects data integrity
  • 10 V operation reduces power draw
  • Validated for Supermicro FatTwin SYS-F521E3-RTB and SYS-F511E2-RT

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-314K8
Capacity256GB (8 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (8X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

What DDR5 speed does this kit run at and what bandwidth does that provide?

The modules operate at DDR5 4800, delivering PC5-38400 bandwidth for server workloads.

What physical slot and pin count do these 288-pin RDIMMs require?

They fit standard 288-pin DDR5 RDIMM slots on Supermicro FatTwin and SuperServer boards.

How should the eight 32GB modules be populated across the channels?

Install one 1Rx4 RDIMM per channel following the motherboard manual to achieve 256GB total capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.