We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 256GB (8x32GB) DDR5 4800 CL40 ECC RDIMM SuperMicro Compatible memory upgrade

SKU CH-8JDN-CP7WX

Eight-module 256 GB DDR5 4800 CL40 ECC registered kit built for SuperMicro servers

  • Capacity256GB (8 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity for demanding server workloads
  • DDR5 4800 speed with CL40 latency for responsive data handling
  • ECC registered RDIMM design protects data integrity in critical applications
  • 1 V operation reduces power draw across eight modules
  • Validated for SuperMicro SYS-111C-NR SYS-521C-NR X13SEDW-F systems

256GB DDR5 ECC RDIMM kit

This NEMIX RAM kit provides 256GB of DDR5 memory across eight 32GB registered DIMMs. It is built for SuperMicro UP SuperServer SYS-111C-NR and SYS-521C-NR systems using the X13SEDW-F motherboard. The modules deliver ECC protection and registered buffering for stable server operation.

DDR5 4800 registered interface

The DDR5 4800 standard sets the electrical and timing limits for these modules. Registered DIMMs place a register between the DRAM and the memory controller, which reduces electrical load but adds one cycle of latency. The PC5-38400 rating defines the peak transfer rate available to the platform.

Check SuperMicro platform support

Verify that your SuperMicro server or workstation accepts 288-pin DDR5 RDIMMs running at 1.1V with a CL40 latency profile. Confirm the motherboard supports 1Rx4 rank organisation and the full 256GB capacity across all eight slots. Consult the system manual for approved memory population rules before ordering.

Highlights

  • 256 GB total capacity for demanding server workloads
  • DDR5 4800 speed with CL40 latency for responsive data handling
  • ECC registered RDIMM design protects data integrity in critical applications
  • 1 V operation reduces power draw across eight modules
  • Validated for SuperMicro SYS-111C-NR SYS-521C-NR X13SEDW-F systems

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-314K8
Capacity256GB (8 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (8X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Should I pick the 256GB kit with eight 32GB modules or a smaller capacity for my SuperMicro server?

The kit provides 256GB total across eight 32GB RDIMMs, matching the maximum supported population for many SuperMicro DDR5 platforms.

What does the DDR5 4800 CL40 rating deliver once installed in a SuperMicro SYS-111C-NR or SYS-521C-NR?

Modules run at 4800 MT/s with CL40 latency at 1.1V, providing registered ECC throughput for sustained server workloads.

How does the 288-pin DDR5 RDIMM interface and PC5-38400 standard limit real-world performance?

The 288-pin registered DIMM form factor locks transfer rate to 4800 MT/s and bandwidth to 38400 MB/s per module, capped by the DDR5 RDIMM specification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.