We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM sticks in anti-static tray

NEMIX RAM

NEMIX RAM 256GB (8x32GB) DDR5 4800 ECC RDIMM THINKMATE 611C-TN4R 621C-TN12R memory upgrade

SKU CH-WPDX-KJPME

Adds 256 GB of DDR5 ECC registered memory across eight 32 GB modules at 4800 MT/s for Thinkmate servers

  • Capacity256GB (8 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity from eight 32 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM protects data integrity in servers
  • 10 V operating voltage reduces power draw
  • Validated for Thinkmate 611C-TN4R and 621C-TN12R systems

256GB DDR5 ECC RDIMM kit

This NEMIX RAM kit provides 256GB of DDR5 4800 registered ECC memory across eight 32GB modules. It is built for THINKMATE SuperServer 611C-TN4R and 621C-TN12R platforms that require 288-pin RDIMM modules with 1Rx4 organisation. The modules operate at 1.10V with CL40 latency and contain no heat spreaders.

Suited for compatible THINKMATE servers only

This memory fits the two listed SuperServer models that accept DDR5 4800 ECC RDIMM modules in eight-slot configurations. It is not for systems that use unbuffered UDIMM memory, require a different DDR generation, or need fewer than eight modules to reach the desired capacity. Buyers with other server brands or desktop platforms should verify their exact memory specifications first.

The DDR5 4800 RDIMM form factor decides fit

Only motherboards wired for 288-pin DDR5 registered DIMMs at 4800 MT/s can use this kit. The 1Rx4 rank structure and 1.10V operating voltage are fixed by the module design and must match the server memory controller requirements. If the target system calls for a different speed, voltage, or module type, this kit will not function.

Highlights

  • 256 GB total capacity from eight 32 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM protects data integrity in servers
  • 10 V operating voltage reduces power draw
  • Validated for Thinkmate 611C-TN4R and 621C-TN12R systems

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-314K8
Capacity256GB (8 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (8X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does the DDR5 4800 PC5-38400 interface cap the kit at 4800 MT/s in the ThinkMate 611C-TN4R?

Yes, the modules run at DDR5 4800 (PC5-38400) and the platform will operate them at that speed.

Will the 288-pin RDIMM form factor fit the memory slots in the ThinkMate 621C-TN12R?

The kit uses standard 288-pin DDR5 RDIMMs, which match the registered DIMM slots in those ThinkMate SuperServer models.

What is the correct order for installing the eight 32 GB modules across the CPU channels?

Populate the slots following the motherboard's channel sequence — usually one DIMM per channel per CPU — and seat each module until the retention clips click.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.