We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 RDIMM sticks, bare chips, 288-pin, 32GB kit

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 2400 CL17 ECC RDIMM Dell PowerEdge FC430

SKU CH-7A8A-TFXD2

32 GB DDR4 2400 ECC registered dual-rank kit for Dell PowerEdge FC430 servers

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2400 (PC4 19200)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection guards data integrity in servers
  • Registered design stabilises heavy workloads on Dell PowerEdge FC430
  • 32 GB kit (2 × 16 GB) expands memory capacity
  • DDR4 2400 CL17 at 1.2 V balances speed and efficiency
  • Built with major OEM chips for reliable compatibility

32GB DDR4 ECC RDIMM Kit for PowerEdge FC430

This 32GB kit contains two 16GB DDR4 2400MHz registered DIMMs built with ECC for Dell PowerEdge FC430 servers. It operates at 1.2V with CL17 latency and uses a 1Rx4 rank configuration. The modules are designed for system-specific compatibility in enterprise environments.

Registered DDR4 limits bandwidth to 2400MHz

The registered buffer adds one clock cycle of latency but reduces electrical load on the memory controller, allowing higher capacities per channel. Maximum throughput is capped at the DDR4 2400 standard; faster DDR4 modules will downclock to this speed. ECC functionality requires a motherboard that supports error-correcting registered memory.

Tool-free installation into 288-pin slots takes

Align the notch on each module with the slot key and press firmly until the retention clips engage. The kit includes two identical sticks for dual-channel operation. Common issues arise when mixing registered and unbuffered DIMMs or when the BIOS is not updated to recognise the 1Rx4 density.

Highlights

  • ECC protection guards data integrity in servers
  • Registered design stabilises heavy workloads on Dell PowerEdge FC430
  • 32 GB kit (2 × 16 GB) expands memory capacity
  • DDR4 2400 CL17 at 1.2 V balances speed and efficiency
  • Built with major OEM chips for reliable compatibility

Specifications

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 2666MHZ ECC RDIMM Registered Server Memory
Part NumberMR19200-614K2
Capacity32GB (2 x 16GB)
SpeedDDR4 2400 (PC4 19200)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL17
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (2X16GB) DDR4 2400MHZ PC4-19200 1Rx4 1.2V CL17 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Should I pick the 32 GB kit or a different capacity for my Dell PowerEdge FC430?

This kit provides 32 GB as two 16 GB modules, matching the FC430's dual-channel layout for balanced throughput.

What does the 2400 MT/s rating actually deliver once installed in the server?

The modules run at DDR4 2400 (PC4-19200) with CL17 latency, giving the bandwidth and timing the FC430's memory controller expects.

Is the 288-pin RDIMM interface fully compatible with the FC430's memory slots?

Yes, the 288-pin DDR4 RDIMM form factor with ECC and registered buffering is the exact standard the FC430 requires.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.