NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
32 GB registered ECC DDR4 kit with two 16 GB modules at 2933 MHz CL21 for Dell Precision 7820 tower workstations
This 32 GB kit delivers two 16 GB DDR4 2933 registered DIMMs built for the Dell Precision 7820 tower workstation. ECC protection and registered signalling keep data integrity high in professional workloads. The modules run at 1.2 V with CL21 latency for stable operation. No heat spreaders are fitted, matching the original server form factor.
Registered DDR4 modules at 1.2 V draw modest power and generate little heat under typical workstation loads. Without heat spreaders the chips rely on chassis airflow, which the Precision 7820 provides through its directed cooling zones. Acoustic impact is negligible because the memory adds no moving parts. Power consumption scales linearly with the number of populated slots.
Installing the pair doubles memory capacity to 32 GB and activates dual-channel bandwidth on supported Precision 7820 configurations. ECC and registered operation remain active, preserving error correction for critical applications. The 288-pin RDIMM format fits the workstation's native slots without adapters. No additional software or firmware steps are required beyond standard BIOS recognition.
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR4 2933MHZ RDIMM Registered Server Memory |
| Part Number | MR23400-628K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Dell |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory KIT |
Power off and unplug the workstation, open the chassis, locate the eight DDR4 slots, align each module's notch with the slot key, press firmly until both retention clips click, then verify in BIOS that all 32GB are detected at 2933MHz.
The modules have no moving parts or heat spreaders; keep interior dust-free and ensure airflow. If a correctable ECC error count rises, run diagnostics and replace the affected 16GB stick; otherwise no scheduled replacement is required.
The registered buffer and 1.2V operation keep thermals low; the first practical limit is the CPU memory controller's maximum supported capacity and channel population rules, not the RDIMM modules themselves.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?