SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
Dual-channel 32 GB kit of DDR4-3200 CL22 UDIMM modules at 1.2 V for compatible ASUS motherboards
This NEMIX RAM kit supplies 32 GB of DDR4 3200 memory as two 16 GB unbuffered UDIMMs. The modules run at 1.2 V with CL22 latency and use a 288-pin desktop form factor. They are built with major-brand DRAM chips and carry no heat spreader.
The kit is validated for ASUS Prime B550M-A WiFi II, Prime B450M-A, Prime X570-Pro and Prime B550M-A motherboards. Builders who need ECC, registered DIMMs, lower CAS latency or a heat spreader should look elsewhere. Systems requiring more than two DIMM slots populated or a different memory generation are not addressed by this product.
Installation uses two standard 288-pin DDR4 slots and draws 1.2 V from the board. The low-profile design leaves clearance for most CPU coolers. The kit frees the remaining DIMM slots for future expansion and keeps the memory subsystem simple for a straightforward upgrade.
| Brand | NEMIX RAM |
|---|---|
| Series | ASUS Gaming Motherboard Compatible Series Memory |
| Model | ASUS DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | ASUS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Yes, this kit uses 288-pin DDR4 UDIMM modules that require standard desktop DDR4 slots.
The kit is specified for CL22 at 1.20V and is listed as compatible with the PRIME B450M-A, so the board should apply those settings by default.
Check the memory speed in your BIOS or use a system-information tool such as CPU-Z to confirm 3200 MT/s on each module.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?