We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 RDIMM modules, no heat spreaders, gold contacts visible

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 ECC RDIMM THINKMATE STX-TN-XE16-23S3 NAS memory upgrade

SKU CH-V51V-HNY8G

A 32 GB dual-channel DDR4-3200 ECC registered kit built for the Thinkmate STX-TN-XE16-23S3 NAS

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB kit doubles NAS capacity for heavy workloads
  • ECC registered design corrects errors to protect data integrity
  • DDR4 3200 speed matches server bus for stable throughput
  • CL22 latency at 1.2 V keeps power draw low
  • 288-pin RDIMM form factor fits Thinkmate STX-TN-XE16-23S3 slots

Capacity & Compatibility

This kit supplies 32GB of DDR4 memory across two 16GB RDIMM modules rated at 3200MHz with CL22 latency. It is built specifically for the Thinkmate STX-TN-XE16-23S3 NAS server and carries ECC registered functionality for data integrity in storage workloads.

Upgrade Path

The modules replace lower-capacity or non-ECC DIMMs in the supported NAS platform, adding 32GB of registered memory that the system can address reliably. The jump is worthwhile when the existing configuration limits concurrent services, virtual machines or large file transfers due to insufficient capacity or missing error correction.

Sustained Operation

Each module runs at 1.2V without a heat spreader, relying on the server chassis airflow for cooling during continuous operation. Registered buffering and ECC logic maintain signal stability and correct single-bit errors throughout extended backup, replication or database tasks rather than only during brief bursts.

Highlights

  • 32 GB kit doubles NAS capacity for heavy workloads
  • ECC registered design corrects errors to protect data integrity
  • DDR4 3200 speed matches server bus for stable throughput
  • CL22 latency at 1.2 V keeps power draw low
  • 288-pin RDIMM form factor fits Thinkmate STX-TN-XE16-23S3 slots

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (2X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Will the 288-pin DDR4 RDIMM modules fit the memory slots in the Thinkmate STX-TN-XE16-23S3 NAS?

Yes, the kit uses 288-pin DDR4 RDIMM form factor which matches the registered DIMM slots in the Thinkmate STX-TN-XE16-23S3 NAS.

Do I need to install the two 16 GB sticks in specific slots for the registered ECC memory to initialise correctly?

Install both modules in the same channel pair as shown in the system manual; the common mistake is placing them in adjacent slots instead of the matched pair.

If a module fails years from now, can I replace just one 16 GB stick or must I swap the whole 32 GB kit?

Each 16 GB module is individually tested, so a single stick can be replaced without discarding the matched pair.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.