We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 RDIMM sticks, bare chips, 288-pin, 32GB kit

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 3200 ECC RDIMM CL22 1Rx8 1.2V 288-pin Supermicro 510P-M/MR compatible

SKU CH-PS59-996K4

A 32 GB DDR4 ECC registered kit running at 3200 MHz with CL22 latency for Supermicro 510P-M and 510P-MR servers

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity on dense server boards
  • DDR4 3200 speed delivers high throughput for demanding applications
  • 2 V operation reduces power draw and heat output
  • Validated for Supermicro 510P-M and 510P-MR systems

ECC Registered DDR4 Kit

This 32 GB kit contains two 16 GB DDR4 3200 modules built for registered server platforms. ECC and registered buffering protect data integrity in workloads that cannot tolerate silent corruption. The 1Rx8 organisation and CL22 timing match the specifications validated for Supermicro 510P-M and 510P-MR systems.

288-Pin RDIMM Form Factor

Each module uses the standard 288-pin DDR4 RDIMM connector and operates at 1.2 V without a heat spreader. Registered signalling reduces electrical load on the memory controller, allowing stable operation in multi-DIMM server boards. The low-profile design fits dense chassis where taller heat spreaders would interfere with airflow or adjacent components.

DDR4 3200 Bandwidth Limit

The PC4-25600 interface caps maximum throughput at the rated 3200 MT/s, so workloads needing higher memory bandwidth will hit this ceiling. Registered DIMMs cannot be used in consumer desktop boards that expect unbuffered modules. Capacity is fixed at 32 GB across the two modules, so expansion requires additional DIMM slots and matching registered ECC kits.

Highlights

  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity on dense server boards
  • DDR4 3200 speed delivers high throughput for demanding applications
  • 2 V operation reduces power draw and heat output
  • Validated for Supermicro 510P-M and 510P-MR systems

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-618K2
Capacity32GB (2 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (2X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

What DDR4 speed and PC4 rating does this 3200 kit use?

The kit runs at DDR4 3200 with a PC4-25600 data rate and CL22 latency.

Will these 288-pin RDIMMs fit in a Supermicro 510P-M or 510P-MR server?

The modules are 288-pin DDR4 RDIMMs validated for the Supermicro 510P-M and 510P-MR platforms.

Do I need to install both 16 GB sticks together for registered ECC operation?

Install the pair in matching DIMM slots per the server manual; registered ECC requires identical modules in the correct channels.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.