We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 RDIMM modules, no heat spreader, 288-pin, 32 GB kit

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 3200 ECC RDIMM CL22 THINKMATE EDX-QS10-11E3 memory upgrade

SKU CH-GAN7-CP66R

32 GB dual-channel DDR4-3200 ECC registered server memory kit with CL22 latency and 1.2 V operation

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB kit doubles capacity for memory-hungry workloads
  • ECC registered design detects and corrects single-bit errors
  • DDR4 3200 CL22 delivers high throughput at standard latency
  • 20 V operation reduces power draw per module
  • Validated for ThinkMate EDX-QS10-11E3 server compatibility

System-specific ECC RDIMM kit

This NEMIX RAM kit delivers 32 GB of DDR4 3200 registered ECC memory in a matched pair of 16 GB modules. It is built for the Thinkmate EDX-QS10-11E3 server platform where error-correcting registered DIMMs are required for stable operation. The modules run at 1.2 V with CL22 timings and use a 2Rx8 organisation.

Registered DIMM slot requirements

Each 288-pin RDIMM occupies one registered DIMM slot on a compatible Thinkmate motherboard. The registered buffer reduces electrical load on the memory controller, allowing larger total capacities than unbuffered modules. No heat spreaders are fitted, so airflow across the modules must be provided by the system chassis.

Low-voltage DDR4 thermals

Operating at 1.2 V, the modules generate modest heat under typical server workloads. Passive cooling relies on forced air from the chassis fans directed over the bare PCBs. Power draw scales with capacity and frequency, staying within standard DDR4 registered DIMM limits for the platform.

Highlights

  • 32 GB kit doubles capacity for memory-hungry workloads
  • ECC registered design detects and corrects single-bit errors
  • DDR4 3200 CL22 delivers high throughput at standard latency
  • 20 V operation reduces power draw per module
  • Validated for ThinkMate EDX-QS10-11E3 server compatibility

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (2X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Will the CL22 latency become a bottleneck during sustained server workloads?

CL22 is the rated CAS latency for these DDR4 3200 modules; sustained throughput depends on the memory controller and workload mix rather than the latency figure alone.

How much heat and power do two 16 GB registered DIMMs add when running continuously?

Each module operates at 1.20 V without a heat spreader; total power draw is low for DDR4 RDIMMs, and airflow in a server chassis typically handles the thermal load.

What must the ThinkMate EDX-QS10-11E3 already have to accept this 32 GB kit?

The board needs two free 288-pin DDR4 RDIMM slots that support ECC registered memory at 3200 MT/s and 1.2 V operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.