We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 4800 CL40 SODIMM SuperMicro IoT SuperServer SYS-E100-13AD-C memory upgrade

SKU CH-TMQ9-S20HR

A 32 GB dual-channel DDR5 4800 SODIMM kit for SuperMicro IoT SuperServer SYS-E100-13AD-C systems

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB kit doubles system memory for heavy workloads
  • DDR5 4800 MT/s transfers data faster than previous standards
  • CL40 latency keeps response tight under load
  • 1 V operation reduces power draw and heat
  • Validated for SuperMicro IoT SuperServer SYS-E100-13AD-C

DDR5 SODIMM Kit for SuperMicro IoT Servers

This 32 GB kit contains two 16 GB DDR5 4800 SODIMM modules built for the SuperMicro IoT SuperServer SYS-E100-13AD-C. Each module runs at 1.10 V with CL40 latency in a 1Rx8 unbuffered non-ECC configuration. The 262-pin form factor fits the platform’s soldered memory slots without adapters.

Upgrade from lower-capacity DDR5 SODIMMs

Replacing a 16 GB or 8 GB DDR5 kit with this 32 GB kit doubles or quadruples the memory available to the SYS-E100-13AD-C, CSE-E101-04, X13SAN-C or X13SAN-C-WOHS. The jump is worth it when workloads exceed the original capacity and the system begins swapping to storage. No higher-capacity DDR5 SODIMM option is addressed by this kit.

Sustained load behaviour in a fanless chassis

Modules use major OEM Samsung, Micron or Hynix chips tested under load for stability in the SuperMicro IoT SuperServer’s thermal envelope. The 1.10 V operating voltage and unbuffered design keep power draw predictable during extended compute tasks. Absence of a heat spreader means airflow across the PCB is the only cooling path; enclosed or fanless deployments must ensure adequate case ventilation.

Highlights

  • 32 GB kit doubles system memory for heavy workloads
  • DDR5 4800 MT/s transfers data faster than previous standards
  • CL40 latency keeps response tight under load
  • 1 V operation reduces power draw and heat
  • Validated for SuperMicro IoT SuperServer SYS-E100-13AD-C

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM
Part NumberMS38400-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V 262-PIN Non-ECC Unbuffered SODIMM KIT

Questions about this item

Will the 262-pin SODIMM modules fit the SuperMicro IoT SuperServer SYS-E100-13AD-C?

Yes, the kit is built as 262-pin DDR5 SODIMMs which match the memory slots on the SYS-E100-13AD-C and the CSE-E101-04 chassis.

What is the correct way to seat both 16 GB sticks so the server recognises the full 32 GB?

Insert each module at the same angle until the gold contacts disappear, then press down firmly until both side clips click — partial seating is the most common reason the second stick is not detected.

When should the SODIMM kit be replaced or checked for errors?

Run a memory diagnostic if the system shows random reboots or data corruption; the modules carry a lifetime replacement warranty so a verified fault means a direct swap without further service.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.