We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two bare green DDR5 UDIMM modules side by side

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 1.1V 288-Pin UDIMM MSI Z790 Project Zero

SKU CH-DG3B-XR6EY

A 32 GB dual-channel kit of DDR5 5600 CL46 memory built for the MSI Z790 Project Zero motherboard

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 32GB 2X16GB

  • 32 GB kit (2 × 16 GB) for high-capacity DDR5 builds
  • DDR5 5600 MT/s (PC5-44800) for fast data throughput
  • Low 1.10 V operation reduces power draw and heat
  • CL46 CAS latency supports responsive system performance
  • Validated for MSI Z790 Project Zero motherboard compatibility

32GB DDR5 Kit for MSI Z790 Project Zero

This 32GB kit contains two 16GB DDR5 UDIMMs rated at 5600MHz with CL46 latency. The modules run at 1.1V and use a 288-pin unbuffered non-ECC layout validated for the MSI Z790 Project Zero motherboard.

Upgrade from slower DDR5 or smaller capacity

Replacing 4800MHz DDR5 or a 16GB kit raises bandwidth and headroom for multitasking and gaming. The jump is worthwhile when the board and CPU officially support 5600MHz and the workload benefits from dual-channel 32GB capacity.

Builders targeting MSI Z790 Project Zero

Suits users who want a tested 2x16GB kit at the board's native 5600MHz speed without a heat spreader. Buyers needing ECC, registered modules, lower latency, higher frequencies or larger single-module density should look elsewhere.

Highlights

  • 32 GB kit (2 × 16 GB) for high-capacity DDR5 builds
  • DDR5 5600 MT/s (PC5-44800) for fast data throughput
  • Low 1.10 V operation reduces power draw and heat
  • CL46 CAS latency supports responsive system performance
  • Validated for MSI Z790 Project Zero motherboard compatibility

Specifications

BrandNEMIX RAM
SeriesMSI Gaming Motherboard Compatible Series Memory
ModelMSI DDR5 5600MHZ Non-ECC Unbuffered UDIMM
Part NumberMD44800-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemMSI
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will these 288-pin DDR5 UDIMM modules fit the four slots on my MSI Z790 Project Zero motherboard?

Yes, the kit uses the standard 288-pin DDR5 UDIMM form factor that matches the four DIMM slots on the MSI Z790 Project Zero board.

Do I need to enable XMP or EXPO in the BIOS after inserting the two 16 GB sticks, or will they run at 5600 MT/s automatically?

Insert the modules into the recommended slots, power on, and enter the BIOS to enable the XMP profile so the kit operates at its rated 5600 MT/s CL46 1.10 V settings.

The modules have no heat spreader — will they need active airflow or replacement after sustained heavy workloads?

Bare DDR5 UDIMMs at 1.10 V run cool enough for typical desktop use; add case airflow if you stress the system continuously, otherwise no replacement is expected.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.