We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black memory chips, no heat spreaders

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600MHz CL46 1.1V 288-pin UDIMM Supermicro X14SAZ-TLN4F memory upgrade

SKU CH-JQBM-7C7RW

A 32 GB DDR5 5600 MHz kit with CL46 timing and 1.1 V voltage, built from two 16 GB unbuffered UDIMMs verified for the Supermicro X14SAZ-TLN4F motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 32GB 2X16GB

  • Exact-fit 32 GB kit for Supermicro X14SAZ-TLN4F
  • DDR5-5600 speed with CL46 latency for responsive performance
  • Low 1.1 V operation reduces power draw and heat
  • Major OEM chips from Samsung, Micron or Hynix ensure stability
  • 288-pin UDIMM form factor matches board requirements exactly

32 GB DDR5 kit for Supermicro X14SAZ-TLN4F

This 32 GB kit contains two 16 GB DDR5 UDIMM modules rated at 5600 MHz with CL46 latency and 1.1 V operation. It is built with major OEM chips and tested for stability at the rated speed and timing. The 288-pin unbuffered non-ECC design matches the memory controller expectations of the Supermicro X14SAZ-TLN4F motherboard.

Who this suits and who should look elsewhere

This kit suits owners of the Supermicro X14SAZ-TLN4F who need a verified 32 GB DDR5 upgrade at the board's native 5600 MHz speed. Builders requiring ECC error correction, registered modules, higher capacities, different speeds, or SODIMM form factors should look elsewhere.

The specification that decides fit

The motherboard requires 288-pin DDR5 UDIMM modules that are non-ECC and unbuffered with a 1Rx8 rank structure at 1.1 V; this kit matches those exact electrical and physical parameters.

Highlights

  • Exact-fit 32 GB kit for Supermicro X14SAZ-TLN4F
  • DDR5-5600 speed with CL46 latency for responsive performance
  • Low 1.1 V operation reduces power draw and heat
  • Major OEM chips from Samsung, Micron or Hynix ensure stability
  • 288-pin UDIMM form factor matches board requirements exactly

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Do I need a motherboard with 288-pin DDR5 slots to install this 32 GB kit?

Yes, this kit uses 288-pin DDR5 UDIMM modules that require a DDR5-compatible motherboard with matching slots.

Will these 5600 MHz CL46 modules run at their rated speed on the Supermicro X14SAZ-TLN4F board?

The kit is spec-matched to the Supermicro X14SAZ-TLN4F so the memory controller will recognise the 5600 MHz CL46 timing at 1.1 V.

How can I confirm the system is using the full 32 GB at 5600 MHz after installation?

Check the BIOS memory info or OS task manager to see 32 GB detected and the speed reported as 5600 MHz.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.