SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00503707BTC
In stock
NEMIX RAM
NEMIX RAM 32GB 2x16GB DDR5 6400MHz ECC Registered RDIMM CL52 1.1V Supermicro H14SHM memory upgrade
32 GB DDR5 ECC registered RDIMM kit (2 × 16 GB) at 6400 MHz CL52 1.1 V, validated for Supermicro H14SHM motherboards
- Capacity32GB (2 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 32 GB kit (2 × 16 GB) installs at full capacity on the Supermicro H14SHM
- DDR5-6400 speed with CL52 timing matches the board's rated specification
- 1 V registered ECC RDIMM reduces electrical load on the memory controller
- ECC corrects single-bit errors to prevent silent data corruption
- 288-pin RDIMM form factor fits the exact slot type the motherboard requires
Supermicro H14SHM memory kit
This 32 GB kit contains two 16 GB DDR5 RDIMM modules built for the Supermicro H14SHM motherboard. Registered ECC architecture and a 1.1 V operating voltage match the board's memory controller requirements exactly. The modules run at DDR5 6400 with CL52 latency and a 1Rx8 rank layout. Each stick uses a 288 pin form factor and major OEM DRAM chips for enterprise stability.
Upgrading from lower capacity or speed
Replacing smaller DDR5 RDIMM kits or slower DDR5 modules lets the server populate every slot at full rated frequency. The jump is worthwhile when workloads need maximum registered capacity and on-the-fly error correction without downclocking. Systems already running DDR5 6400 RDIMMs at CL52 will not see a speed increase from this kit.
Build integration details
The RDIMM form factor fits only motherboards that accept registered 288 pin DDR5 memory, so the H14SHM memory population rules must be followed. No heat spreader is present, leaving clearance for dense DIMM arrangements and standard server airflow. ECC and registered buffering free the memory controller from signal loading when all slots are occupied.
Highlights
- 32 GB kit (2 × 16 GB) installs at full capacity on the Supermicro H14SHM
- DDR5-6400 speed with CL52 timing matches the board's rated specification
- 1 V registered ECC RDIMM reduces electrical load on the memory controller
- ECC corrects single-bit errors to prevent silent data corruption
- 288-pin RDIMM form factor fits the exact slot type the motherboard requires
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 32GB 2X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
Will these 288-pin RDIMMs fit the DIMM slots on my Supermicro H14SHM motherboard?
Yes, the kit uses the 288-pin DDR5 RDIMM form factor that the H14SHM requires; it is not a UDIMM or SODIMM and matches the board's physical slot layout.
What is the correct installation order for the two 16 GB modules on the H14SHM?
Install the modules in the exact slot sequence shown in the Supermicro H14SHM manual; the board's population rules dictate which channels must be filled first for the kit to run at 6400 MHz.
Do these registered ECC modules need any firmware updates or battery-backed maintenance over time?
No, the RDIMMs operate at 1.1 V with on-die ECC and require no firmware flashes or battery service; they are solid-state components rated for continuous server operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
