We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR4 RDIMM sticks, no heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 2400 CL17 ECC RDIMM memory upgrade for Dell PowerEdge FC430

SKU CH-9R9J-3WVX1

Four 8 GB DDR4 ECC registered DIMMs running at 2400 MT/s with CL17 latency for Dell PowerEdge FC430 servers

  • Capacity32GB (4 x 8GB)
  • SpeedDDR4 2400 (PC4 19200)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB capacity across four 8 GB modules for server workloads
  • ECC registered RDIMM design protects data integrity in Dell PowerEdge FC430
  • DDR4 2400 MHz speed at CL17 latency balances throughput and response
  • 2 V operation reduces power draw in dense chassis
  • Validated with major OEM DRAM from Samsung, Micron and Hynix for reliability

Dell PowerEdge FC430 memory kit

This 32GB kit contains four 8GB DDR4 2400 registered ECC modules built for the Dell PowerEdge FC430 server. Each stick runs at 1.2V with CL17 latency and a 1Rx4 organisation. The registered design adds a buffer that helps the memory controller maintain signal integrity across all populated slots.

Check registered ECC support and slot count

Verify that your FC430 firmware accepts registered ECC RDIMMs and that four 288-pin DDR4 slots are free for the full kit. The modules operate at DDR4 2400 (PC4-19200) so the system must be configured for that speed or be able to downclock automatically. Mixing these sticks with unbuffered or non-ECC memory will prevent the server from posting.

Major OEM chips on bare green PCBs

Samsung, Micron or Hynix ICs are used without heat spreaders, relying on the server's directed airflow for cooling. The 288-pin RDIMM form factor locks securely into the FC430's vertical DIMM sockets, and the registered buffer reduces electrical load on the memory bus during heavy workloads.

Highlights

  • 32 GB capacity across four 8 GB modules for server workloads
  • ECC registered RDIMM design protects data integrity in Dell PowerEdge FC430
  • DDR4 2400 MHz speed at CL17 latency balances throughput and response
  • 2 V operation reduces power draw in dense chassis
  • Validated with major OEM DRAM from Samsung, Micron and Hynix for reliability

Specifications

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 2666MHZ ECC RDIMM Registered Server Memory
Part NumberMR19200-814K4
Capacity32GB (4 x 8GB)
SpeedDDR4 2400 (PC4 19200)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL17
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (4X8GB) DDR4 2400MHZ PC4-19200 1Rx4 1.2V CL17 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does the kit include four 8 GB modules so I can populate all four slots without buying extra sticks?

The package contains four 8 GB RDIMMs, giving 32 GB total in a single kit.

Should I choose the 2400 MHz CL17 kit or the 2666 MHz variant listed in the model name?

The modules run at 2400 MHz with CL17 timing; the 2666 MHz figure appears only in the series description, not the actual speed rating.

What does the CL17 latency mean for my Dell PowerEdge FC430 once the memory is installed?

CL17 indicates a CAS latency of 17 cycles at 2400 MHz, which is the standard timing for this registered ECC DDR4 configuration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.