NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
A 32 GB DDR4 2933 MHz registered ECC memory kit for the Dell Precision 5820 workstation
This 32GB kit contains four 8GB DDR4 2933 ECC registered DIMMs built for the Dell Precision 5820 tower workstation. Each module runs at 1.2V with CL21 latency and a 1Rx8 organisation. The registered design adds a buffer that helps the memory controller maintain signal integrity across all populated slots.
Operating at the standard DDR4 voltage of 1.2V keeps power consumption low during typical workstation workloads. Without a heat spreader the modules rely on case airflow, which is sufficient for normal office and engineering tasks. Registered buffering reduces electrical load on the memory controller, contributing to stable, quiet operation.
All modules are stress tested under load before shipping to verify reliability during extended compute sessions. ECC circuitry detects and corrects single-bit errors that can appear during long rendering or simulation runs. The registered architecture maintains consistent timing when all four slots are populated at 2933 MT/s.
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR4 2933MHZ RDIMM Registered Server Memory |
| Part Number | MR23400-818K4 |
| Capacity | 32GB (4 x 8GB) |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Dell |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 32GB (4X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory KIT |
Power off the workstation, open the chassis, align each module's notch with the slot key, press firmly until the latches click, then verify in BIOS that all 32GB are detected at 2933MHz — the step most often missed is reseating a module that appears seated but has not fully latched.
No scheduled maintenance is required; the modules have no heat spreaders or moving parts. Replacement is only necessary if a module fails, which is covered by the manufacturer's lifetime replacement warranty.
The DDR4 2933MHz CL21 specification sets the throughput ceiling; under continuous load the memory controller will throttle before the modules exceed their rated voltage or timing envelope.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?