We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR4 ECC UDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 3200 ECC UDIMM CL22 memory upgrade

SKU CH-RNKB-YRWE6

32 GB DDR4 ECC UDIMM kit at 3200 MT/s with CL22 latency and 1.2 V operation

  • Capacity32GB (4 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB capacity across four 8 GB modules for expanded multitasking headroom
  • DDR4 3200 speed rated at PC4-25600 for high data throughput
  • ECC unbuffered design detects and corrects single-bit errors automatically
  • 2 V operation reduces power draw while maintaining stability
  • 288-pin UDIMM form factor fits ASUS Xeon E-2300 LGA 1200 micro-ATX server boards

32GB DDR4 ECC kit for ASUS Xeon servers

This NEMIX RAM kit provides 32GB of DDR4 3200 ECC unbuffered memory across four 8GB modules. It is built for ASUS micro-ATX server motherboards that support Intel Xeon E-2300 processors on the LGA 1200 platform. System builders upgrading compatible workstations or entry-level servers will find the correct density and error-correction here.

CL22 latency at 1.20V

The modules run at CL22 with a standard 1.20V supply and are organised as single-rank 1Rx8 chips on a 288-pin UDIMM form factor. This timing and voltage combination is the decisive specification; motherboards that require different latency, voltage or rank organisation will not operate correctly with this kit.

Straightforward DIMM installation

Installation follows the usual UDIMM procedure: power down, open the chassis, align the notch and press each module into the slot until the retention clips engage. The most common issue is populating the slots in the wrong order for the specific ASUS board, so the motherboard manual must be consulted to match the validated channel configuration.

Highlights

  • 32 GB capacity across four 8 GB modules for expanded multitasking headroom
  • DDR4 3200 speed rated at PC4-25600 for high data throughput
  • ECC unbuffered design detects and corrects single-bit errors automatically
  • 2 V operation reduces power draw while maintaining stability
  • 288-pin UDIMM form factor fits ASUS Xeon E-2300 LGA 1200 micro-ATX server boards

Specifications

BrandNEMIX RAM
SeriesASUS Server Motherboard Compatible Series Memory
ModelASUS DDR4 3200MHZ ECC Unbuffered UDIMM
Part NumberME25600-818K4
Capacity32GB (4 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASUS
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank1Rx8
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (4X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM KIT

Questions about this item

Will the 3200 MHz rating actually run at 3200 MHz in my ASUS Xeon E-2300 server board?

The kit is rated DDR4 3200 PC4-25600; the Xeon E-2300 memory controller supports up to 3200 MT/s, so the modules will operate at the rated speed when the board is configured for it.

Does the ECC UDIMM interface require a registered DIMM slot or can it use standard unbuffered slots?

These are 288-pin ECC unbuffered UDIMMs, so they install directly into standard DDR4 UDIMM slots — no registered or load-reduced slot is needed.

Will the four 8 GB sticks fit the four DIMM slots on a micro-ATX ASUS board without clearance issues?

Each module is a low-profile 288-pin UDIMM without a heat spreader, so all four fit side-by-side in the micro-ATX board's four DIMM slots.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.