We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge contacts

NEMIX RAM

NEMIX RAM 32GB DDR4 2666 CL19 1.2V 288-pin UDIMM Dell SNP983D4C/32G AA846134 desktop RAM

SKU CH-KREC-J9N8F

A 32 GB DDR4 2666 CL19 1.2 V 288-pin UDIMM module validated for Dell SNP983D4C/32G AA846134 systems

  • Capacity32GB
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCNo
  • 32 GB capacity handles demanding workloads
  • DDR4 2666 speed delivers responsive multitasking
  • CL19 latency supports smooth system operation
  • 20 V voltage reduces power consumption
  • 288-pin UDIMM fits compatible Dell desktops

32GB DDR4 UDIMM for Dell systems

This 32GB DDR4 module is built for desktop PCs that accept 288-pin unbuffered non-ECC memory. It matches the Dell SNP983D4C/32G and AA846134 part numbers, making it a direct replacement for compatible Dell workstations and all-in-one units.

Tool-free slot insertion with manual verification

Installation requires opening the case, aligning the notch on the 288-pin edge connector, and pressing firmly until the retention clips click. The most common issue is a partially seated module; if the system fails to POST, reseat the stick and confirm the motherboard supports 32GB single-rank or dual-rank densities.

CL19 latency at 2666 MT/s decides fit

The module runs at DDR4 2666 (PC4-21300) with a CAS latency of 19 and 1.20V. If your board or CPU memory controller is limited to lower speeds or tighter timings, the part will downclock but may not meet the original timing profile.

Highlights

  • 32 GB capacity handles demanding workloads
  • DDR4 2666 speed delivers responsive multitasking
  • CL19 latency supports smooth system operation
  • 20 V voltage reduces power consumption
  • 288-pin UDIMM fits compatible Dell desktops

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD21300-328K1
Capacity32GB
Type288-Pin DDR4 UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Questions about this item

How can I verify the module is running at 2666 MHz after installation?

Open Task Manager or CPU-Z and confirm the memory speed reads 2666 MHz (PC4-21300) with CL19 timings at 1.20V.

What comes in the box and do I need any extra parts?

The box contains one 32GB 288-pin UDIMM module; no cables, brackets or additional components are required for a standard desktop DIMM slot.

Which capacity should I choose if my Dell service tag lists SNP983D4C/32G or AA846134?

Select this single 32GB stick (part MD21300-328K1) to match the exact Dell part numbers and fill one slot with the full 32GB.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.