We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 32GB DDR4 3200 CL22 2Rx8 1.2V 288-Pin UDIMM for ASRock B660M memory upgrade

SKU CH-0N2K-DV34K

A 32 GB DDR4 3200 CL22 UDIMM module validated for ASRock B660M motherboards

  • Capacity32GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB capacity boosts multitasking headroom
  • DDR4 3200 speed matches ASRock B660M spec
  • CL22 latency keeps timings stable
  • 20 V operation lowers power draw
  • 288-pin UDIMM fits standard desktop slots

32GB DDR4 3200 UDIMM for ASRock B660M

This 32GB DDR4 3200 CL22 module is built for ASRock B660M motherboards. It runs at 1.20V as a 2Rx8 unbuffered non-ECC UDIMM. The 288-pin stick uses major OEM chips and has no heat spreader. It fits desktop PCs needing a single high-density upgrade.

Who this suits and who it does not

Builders upgrading compatible ASRock B660M boards with a single 32GB DIMM will benefit. Buyers needing ECC, registered modules, lower latency than CL22, a heat spreader, multiple sticks in a kit, DDR5, or compatibility with other motherboard brands should look elsewhere.

2Rx8 32GB density decides fit

The 2Rx8 32GB organisation determines whether the board recognises the full capacity. ASRock B660M-HDV, B660M-ITX/ac and B660M-ITX/eDP support this density. Systems limited to 1Rx8 or lower maximum per slot will not use the full 32GB.

Highlights

  • 32 GB capacity boosts multitasking headroom
  • DDR4 3200 speed matches ASRock B660M spec
  • CL22 latency keeps timings stable
  • 20 V operation lowers power draw
  • 288-pin UDIMM fits standard desktop slots

Specifications

BrandNEMIX RAM
SeriesASRock Gaming Motherboard Compatible Series Memory
ModelASRock DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-328K1
Capacity32GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM

Questions about this item

Does my ASRock B660M motherboard need a free 288-pin DDR4 slot for this 32GB UDIMM?

Yes, this single 32GB module occupies one 288-pin DDR4 UDIMM slot on any compatible ASRock B660M board.

Will this CL22 3200MHz stick run with my existing DDR4 modules at lower speeds?

The motherboard will down-clock all installed DDR4 to the slowest module’s speed and loosest timings, so mixing is possible but overall bandwidth drops.

How can I confirm the module is detected at 3200 MT/s with CL22 after installation?

Enter the UEFI/BIOS or use a tool such as CPU-Z to verify the memory shows 3200 MT/s, 1.20 V and CAS latency 22.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.