We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR5 4800 ECC RDIMM CL40 2Rx8 Micron Compatible

SKU CH-1NBP-FA7QM

32 GB DDR5-4800 ECC registered DIMM, CL40, 2Rx8, 1.1 V, 288-pin for Micron servers

  • Capacity32GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB capacity supports large server workloads
  • DDR5 4800 speed delivers high data throughput
  • ECC registered design protects data integrity
  • 1 V operation reduces power consumption
  • 2Rx8 dual-rank layout optimises memory density

32 GB DDR5 4800 ECC RDIMM

This 32 GB DDR5 4800 module is an ECC registered DIMM built for Micron-compatible servers and workstations. It runs at 1.10 V with a CAS latency of CL40 and uses a 2Rx8 organisation on a 288-pin PCB. The stick is designed for environments that require error correction and registered signalling.

Suited for Micron server upgrades.

IT teams maintaining Micron-qualified platforms can use this module to add 32 GB of registered ECC capacity. Builders putting together consumer desktops, laptops or unbuffered workstations should look elsewhere because the registered interface and ECC function are not supported on those boards.

Registered ECC RDIMM interface decides fit

The single specification that determines compatibility is the registered ECC RDIMM interface. Only motherboards and server platforms that explicitly accept DDR5 4800 registered ECC modules with a 2Rx8 layout will recognise and run this memory correctly.

Highlights

  • 32 GB capacity supports large server workloads
  • DDR5 4800 speed delivers high data throughput
  • ECC registered design protects data integrity
  • 1 V operation reduces power consumption
  • 2Rx8 dual-rank layout optimises memory density

Specifications

BrandNEMIX RAM
SeriesMicron Server/Workstaion Compatible Series Memory
ModelMicron DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-328K1
Capacity32GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemMICRON
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (1X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

How do I install this 288-pin DDR5 RDIMM in a Micron-compatible server, and what step is often missed?

Power down the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both ejector clips click, then verify in BIOS that the 32GB module is recognised at 4800 MT/s with ECC enabled.

What maintenance or replacement will this registered ECC module need during its service life?

The module has no moving parts and no heat spreader; keep server air filters clean so airflow stays adequate for the 1.1V DRAM. If a correctable ECC error count rises sharply, replace the DIMM — otherwise it runs for the system lifetime.

What limit appears first when this CL40 2Rx8 RDIMM runs sustained workloads?

The CAS latency of CL40 at 4800 MT/s sets the baseline response time; under continuous load the memory controller’s thermal throttling or the 1.10V voltage ceiling will cap sustained throughput before the module itself fails.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.