We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR5 4800 PC5-38400 ECC RDIMM 1Rx4 CL40 1.1V 288-Pin SuperMicro Server Memory Upgrade

SKU CH-P2BJ-HF13X

32 GB DDR5-4800 ECC registered RDIMM for SuperMicro servers, CL40 1.1 V

  • Capacity32GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • ECC protection prevents data corruption in critical workloads
  • Registered design improves signal integrity for stable server operation
  • DDR5 4800 speed delivers high bandwidth for demanding applications
  • 32GB single module maximises capacity per DIMM slot
  • 1V operation reduces power draw in dense deployments

32GB DDR5 4800 ECC RDIMM for SuperMicro servers

This NEMIX RAM module delivers 32GB of DDR5 4800 memory with ECC and registered buffering. It operates at 1.1V with CL40 latency in a 288-pin 1Rx4 configuration. The part is validated for SuperMicro UP SuperServer SYS-111C-NR and SYS-521C-NR systems with X13SEDW-F motherboards.

Suits admins adding ECC capacity to qualified

Builders needing unbuffered UDIMMs or non-ECC memory for desktop boards cannot use this registered DIMM. Systems that require RDIMM support and ECC error correction will accept this module; platforms without registered memory support will not.

Registered DDR5 with on-die ECC at 4800 MT/s

The registered buffer and ECC logic maintain data integrity under sustained server workloads. The 4800 MT/s rating matches the PC5-38400 specification for compatible SuperMicro motherboards.

Highlights

  • ECC protection prevents data corruption in critical workloads
  • Registered design improves signal integrity for stable server operation
  • DDR5 4800 speed delivers high bandwidth for demanding applications
  • 32GB single module maximises capacity per DIMM slot
  • 1V operation reduces power draw in dense deployments

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-314K1
Capacity32GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (1X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

What slot type does the 288-pin DDR5 RDIMM need on a SuperMicro SYS-111C-NR or SYS-521C-NR?

It fits a standard 288-pin DDR5 RDIMM slot on the X13SEDW-F motherboard used in those SuperMicro SuperServer systems.

Which orientation step is most often missed when seating this registered ECC module?

Align the off-centre notch on the 288-pin edge connector with the key in the slot, press straight down until both retention clips click, and verify the module sits evenly.

When should the 32 GB 1Rx4 CL40 1.10 V module be replaced in a server running continuous ECC workloads?

Replace it if the system logs show rising corrected error counts, fails memory diagnostics, or becomes unstable after firmware updates.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.