We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Single green circuit board with black memory chips no heat spreader 288 pin DDR5 UDIMM

NEMIX RAM

NEMIX RAM 32GB DDR5 5200 CL38 1.1V 288-pin UDIMM memory upgrade

SKU CH-DJWX-HEPYS

A 32 GB DDR5 desktop module running at 5200 MHz with CL38 latency and 1.1 V operation, validated for ASRock Z790 Taichi motherboards

  • Capacity32GB
  • SpeedDDR5 5200 (PC5 41600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 32GB

  • 32 GB capacity expands desktop multitasking headroom
  • DDR5 5200 speed accelerates data throughput for demanding workloads
  • CL38 latency tightens response times in compatible systems
  • 1 V operation reduces power draw per module
  • Validated for ASRock Z790 Taichi motherboard compatibility

32GB DDR5 5200 UDIMM for ASRock Z790

This 32GB DDR5 module runs at 5200MHz with a CAS latency of 38 at 1.1V. It is built as a single 288-pin UDIMM using a 2Rx8 rank configuration. The memory is validated for ASRock Z790 Taichi, Taichi Carrara and Taichi Lite motherboards. It targets builders who want a straightforward capacity increase on these specific boards.

Unbuffered non-ECC design with major OEM chips

The stick uses Samsung, Micron or Hynix components and has no heat spreader. Its unbuffered, non-ECC layout means it drops directly into standard desktop DIMM slots without extra cabling or software setup. The low 1.1V operating voltage keeps power draw modest while the 2Rx8 organisation supports stable operation at the rated PC5-41600 speed.

Replaces slower or smaller DDR5 kits on Z790

Swapping an existing 16GB or lower-speed DDR5 module for this 32GB unit doubles capacity and matches the motherboard's qualified 5200MHz profile. The upgrade is worth it when your workload hits memory limits or when the board's QVL lists this exact part number MD41600-328K1. It is not for systems that require ECC, registered DIMMs or a different DDR generation.

Highlights

  • 32 GB capacity expands desktop multitasking headroom
  • DDR5 5200 speed accelerates data throughput for demanding workloads
  • CL38 latency tightens response times in compatible systems
  • 1 V operation reduces power draw per module
  • Validated for ASRock Z790 Taichi motherboard compatibility

Specifications

BrandNEMIX RAM
SeriesASRock Gaming Motherboard Compatible Series Memory
ModelASRock DDR5 5200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD41600-328K1
Capacity32GB
SpeedDDR5 5200 (PC5 41600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemASRock
CAS LatencyCL38
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR5 5200MHZ PC5-41600 2Rx8 1.1V CL44 288-PIN Non-ECC Unbuffered UDIMM

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What DDR5 speed and CAS latency does this 32GB module run at?

The module operates at DDR5 5200 with a CAS latency of CL38.

Will this 288-pin UDIMM fit my ASRock Z790 Taichi motherboard?

Yes, it is a 288-pin DDR5 UDIMM validated for ASRock Z790 Taichi, Carrara and Lite boards.

How do I install this single 32GB stick and which slot should I use first?

Power off, open the case, align the notch on the 288-pin module with the DDR5 slot key, press firmly until the latches click, then boot and enable XMP in BIOS.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.