We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 32GB DDR5 5600 CL40 2Rx8 ECC RDIMM memory upgrade

SKU CH-Y2GB-MQWPD

32 GB DDR5 5600 CL40 ECC registered RDIMM for Micron servers, 2Rx8 at 1.1 V

  • Capacity32GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • ECC protection guards data integrity in servers
  • 5600 MT/s DDR5 speed handles heavy workloads
  • Registered design stabilises signal on loaded channels
  • 10 V operation reduces power draw
  • 2Rx8 288-pin RDIMM fits Micron-compatible systems

Capacity and form factor

This 32GB DDR5 RDIMM uses a 288-pin layout and operates at 1.1V. The module is built as a single 32GB stick with a 2Rx8 rank configuration. It is intended for server and workstation platforms that require registered ECC memory.

Target systems and limitations

Suitable for Micron-compatible servers and workstations that support registered DDR5 ECC RDIMMs. Not for consumer desktop boards that accept only unbuffered non-ECC modules, nor for laptops or small-form-factor systems using SODIMM slots. Buyers needing unbuffered memory or a different pin count should look elsewhere.

Deciding specification

The registered ECC RDIMM design with 2Rx8 organisation and CL40 latency at 5600 MT/s determines whether the module will function in a given platform. Systems that require unbuffered memory or a different CAS latency will not accept this part.

Highlights

  • ECC protection guards data integrity in servers
  • 5600 MT/s DDR5 speed handles heavy workloads
  • Registered design stabilises signal on loaded channels
  • 10 V operation reduces power draw
  • 2Rx8 288-pin RDIMM fits Micron-compatible systems

Specifications

BrandNEMIX RAM
SeriesMicron Server/Workstaion Compatible Series Memory
ModelMicron DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-328K1
Capacity32GB
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemMICRON
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (1X32GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Does the 288-pin DDR5 RDIMM fit a standard server DIMM slot?

Yes, the module uses the 288-pin DDR5 RDIMM form factor that matches standard registered server DIMM sockets.

What is the correct orientation step when seating the 2Rx8 registered module?

Align the off-centre notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, and verify the module sits evenly.

Will the 1.10 V DDR5 ECC RDIMM require any firmware or voltage adjustment later?

No, the module operates at the standard 1.10 V DDR5 specification and does not need firmware updates or voltage changes during its service life.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.