We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board DDR5 memory module 288 pins

NEMIX RAM

NEMIX RAM 32GB DDR5 5600 CL46 1.1V 2Rx8 288-pin UDIMM Supermicro C9Z790-CG memory upgrade

SKU CH-X84J-N3QMY

32 GB DDR5 5600 CL46 1.1 V 2Rx8 288-pin UDIMM built for Supermicro C9Z790-CG motherboards

  • Capacity32GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB capacity expands multitasking headroom for demanding workloads
  • DDR5 5600 speed delivers high bandwidth for data-intensive applications
  • CL46 latency with 1.1 V operation balances responsiveness and efficiency
  • 2Rx8 dual-rank architecture increases memory density per module
  • Validated for Supermicro C9Z790-CG motherboard compatibility

32GB DDR5 5600 UDIMM for Supermicro C9Z790-CG

This NEMIX RAM module provides 32GB of DDR5 5600 memory in a single 288-pin UDIMM. It operates at 1.10V with CL46 latency and uses a 2Rx8 rank configuration built with major OEM chips. The kit is validated for the Supermicro C9Z790-CG motherboard.

Suits builders upgrading a Supermicro C9Z790-CG

Buyers needing ECC error correction or registered modules for a server platform should look elsewhere. Systems requiring a heat spreader on every DIMM will not find one here. This product is a non-ECC unbuffered UDIMM only.

Verify your board is the Supermicro C9Z790-CG

Confirm the motherboard accepts 288-pin DDR5 UDIMMs at 5600 MT/s and 1.1V. Check that the CPU and BIOS support 32GB single-rank or dual-rank modules in the desired slot layout. Ensure no ECC or registered memory requirement exists for your workload.

Highlights

  • 32 GB capacity expands multitasking headroom for demanding workloads
  • DDR5 5600 speed delivers high bandwidth for data-intensive applications
  • CL46 latency with 1.1 V operation balances responsiveness and efficiency
  • 2Rx8 dual-rank architecture increases memory density per module
  • Validated for Supermicro C9Z790-CG motherboard compatibility

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 5600MHZ Non-ECC Unbuffered RAM
Part NumberMD44800-328K1
Capacity32GB
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-PIN DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM

Questions about this item

Does the Supermicro C9Z790-CG motherboard need to support DDR5 5600 PC5-44800 for this module to work?

Yes, the board must accept DDR5 5600 PC5-44800 non-ECC unbuffered UDIMMs at 1.10 V; the Supermicro C9Z790-CG is the validated platform for this 32 GB kit.

Will this 288-pin DDR5 module run at 5600 MT/s alongside slower DDR5 DIMMs already in the system?

The memory controller will clock all installed DDR5 DIMMs to the lowest common speed, so older DDR5 modules will pull this kit down from its rated 5600 MT/s.

How can I confirm the module is running at CL46 1.10 V after installation?

Check the BIOS memory information or a utility such as CPU-Z; it should report DDR5 5600, CAS latency 46, voltage 1.10 V and 2Rx8 organisation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.