SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
32 GB DDR5 module running at 5600 MHz with CL46 latency and 1.10 V operation in a 288-pin UDIMM form factor
This 32 GB DDR5 module runs at 5600 MT/s with a CAS latency of 46 and operates at 1.1 V. The 288-pin UDIMM form factor fits desktop motherboards that support DDR5 and is validated for Samsung systems using part reference M323R4GA3DB0-CWM.
The stick has no heat spreader and relies on the case airflow and motherboard cooling zones. At the standard 1.1 V it draws minimal power and runs silently because no active cooling is required. Typical workloads stay within JEDEC thermal limits without additional measures.
The package contains only the single 32 GB UDIMM; no extra brackets, cables or software are included. Installation is a straightforward slot insertion guided by the motherboard manual. The lifetime replacement warranty covers the module itself rather than any accessories.
| Brand | NEMIX RAM |
|---|---|
| Series | Samsung Server/Workstation Compatible Series Memory |
| Model | Samsung DDR5 5600MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD44800-328K1 |
| Capacity | 32GB |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Samsung |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM |
Align the notch on the module with the slot key, press firmly until both retention clips snap shut, then verify in BIOS that the memory runs at 5600 MT/s and 1.10 V.
No routine maintenance is required; if errors appear, run a memory diagnostic and replace the module if it fails — no heat spreader means dust can be removed with compressed air.
The CAS latency of 46 cycles at 5600 MT/s sets the response-time floor; thermal throttling is unlikely without a spreader, so latency remains the primary constraint.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?