We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM modules in anti-static packaging

NEMIX RAM

NEMIX RAM 384GB (12x32GB) DDR5 4800 CL40 ECC RDIMM SuperMicro X13SET-G GC memory upgrade

SKU CH-A2V5-D6FCG

A 384 GB DDR5 ECC registered server memory kit with twelve 32 GB modules running at 4800 MHz CL40 for SuperMicro X13SET-G and X13SET-GC motherboards

  • Capacity384GB (12 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 384 GB total capacity from twelve 32 GB modules
  • DDR5 4800 speed with CL40 latency for server workloads
  • ECC registered RDIMM design ensures data integrity
  • 1 V operating voltage reduces power draw
  • Validated for SuperMicro X13SET-G and X13SET-GC motherboards

384 GB DDR5 ECC RDIMM kit

This 384 GB kit contains twelve 32 GB DDR5 4800 CL40 registered ECC modules. It is built for the SuperMicro X13SET-G and X13SET-GC motherboards. Each module runs at 1.1 V and uses a 1Rx4 organisation on a 288-pin form factor. The kit is supplied new and ready for server or workstation deployment.

Suited for memory-intensive server workloads

Administrators expanding a SuperMicro X13SET-G or X13SET-GC platform to 384 GB will find the registered ECC design matches the board requirements. Systems that cannot accept registered DIMMs, that need unbuffered memory, or that require a different speed or voltage should select another kit.

Check motherboard memory slots and population rules

Verify that the X13SET-G or X13SET-GC has twelve available DDR5 RDIMM slots before ordering. Confirm the board supports 1Rx4 registered modules at 4800 MT/s and 1.1 V operation. Consult the system manual for the correct slot-filling sequence to ensure full capacity is recognised.

Highlights

  • 384 GB total capacity from twelve 32 GB modules
  • DDR5 4800 speed with CL40 latency for server workloads
  • ECC registered RDIMM design ensures data integrity
  • 1 V operating voltage reduces power draw
  • Validated for SuperMicro X13SET-G and X13SET-GC motherboards

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-314K12
Capacity384GB (12 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content384GB (12X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Must the SuperMicro X13SET-GC motherboard already be installed to accept this 12-module DDR5 4800 CL40 kit?

Yes, the kit is built for that specific motherboard and requires its 288-pin DDR5 RDIMM slots to operate.

Can I mix these 1Rx4 registered DDR5 modules with other registered DDR5 DIMMs already in the system?

Mixing registered DDR5 modules of the same speed and voltage is supported by the platform, but matching rank and capacity per channel gives the most stable operation.

How do I confirm the full 384 GB is recognised at 4800 MT/s with ECC active after installation?

Check the BIOS memory summary or run a tool such as dmidecode to verify 12 modules detected, 4800 MT/s speed, CL40 timings and ECC enabled.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.