SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00496341BTC
In stock
NEMIX RAM
NEMIX RAM 384GB 12x32GB DDR5 6400 CL52 1.1V 2Rx8 ECC RDIMM Supermicro H14DSG-OM memory upgrade
384 GB kit of twelve 32 GB DDR5 6400 CL52 1.1 V ECC registered RDIMMs validated for Supermicro H14DSG-OM
- Capacity384GB (12 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 384 GB total capacity from twelve 32 GB modules
- DDR5-6400 speed with CL52 latency at 1.1 V
- Registered ECC design corrects single-bit errors on the fly
- 2Rx8 dual-rank organisation fully populates every slot
- 288-pin RDIMM form factor matches Supermicro H14DSG-OM requirements
Server-grade DDR5 upgrade kit
This 384 GB kit contains twelve 32 GB DDR5-6400 RDIMM modules built for the Supermicro H14DSG-OM motherboard. Each stick runs at 1.1 V with CL52 latency and 2Rx8 registered ECC architecture. The registered design buffers address and command signals so the memory controller stays stable when every slot is populated. ECC corrects single-bit errors on the fly to protect data integrity in production workloads.
Slot-specific installation
The board requires 288-pin RDIMMs in a defined population order; UDIMMs or SODIMMs will not fit or function. Follow the motherboard manual for the exact slot sequence because mis-ordered modules can prevent boot or limit capacity. No heat spreaders are present, so airflow through the chassis must reach the bare PCB. Handle modules by the edges and seat each one firmly until the retention clips click.
Full-population capacity ceiling
Twelve modules fill every DIMM slot on the H14DSG-OM, delivering the maximum 384 GB this platform supports with 32 GB densities. Workloads such as large in-memory databases, virtualization hosts or HPC datasets fit comfortably within this headroom. Applications that demand more than 384 GB or higher per-module density will exceed what this board and kit can provide.
Highlights
- 384 GB total capacity from twelve 32 GB modules
- DDR5-6400 speed with CL52 latency at 1.1 V
- Registered ECC design corrects single-bit errors on the fly
- 2Rx8 dual-rank organisation fully populates every slot
- 288-pin RDIMM form factor matches Supermicro H14DSG-OM requirements
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-328K12 |
| Capacity | 384GB (12 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 12X32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Questions about this item
How can I verify the kit is running at DDR5-6400 CL52 1.1V after installing it in the Supermicro H14DSG-OM?
Enter the BIOS and confirm the memory speed shows 6400 MT/s, CAS latency 52, and voltage 1.10V across all 12 slots; run a full memtest pass to ensure ECC is active and no errors appear.
What comes in the box and do I need any extra parts for the Supermicro H14DSG-OM?
The kit includes twelve 32 GB DDR5 288-pin RDIMM modules for a total of 384 GB; no additional memory parts are required for a full population on the H14DSG-OM.
Which capacity version should I choose for the Supermicro H14DSG-OM if I want the maximum supported kit?
This 384 GB kit (12 × 32 GB, 2Rx8, CL52, 1.10V) is the exact-match upgrade validated for the H14DSG-OM; choose it when the board's manual lists 384 GB as the maximum supported capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
