We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 384GB 12x32GB DDR5 6400 CL52 1.1V 2Rx8 ECC Registered RDIMM Kit for Supermicro H13DSH memory upgrade

SKU CH-3VBV-AG3ZX

A 384 GB kit of twelve 32 GB DDR5 6400 CL52 1.1 V 2Rx8 ECC registered RDIMMs validated for Supermicro H13DSH servers

  • Capacity384GB (12 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 384 GB total capacity from twelve 32 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency at 1.1 V for rated performance
  • Registered ECC RDIMM design corrects single-bit errors and offloads the memory controller
  • 2Rx8 dual-rank organisation matches the Supermicro H13DSH population rules exactly
  • 288-pin DDR5 RDIMM form factor fits the board's memory slots without adapters

384GB DDR5 6400 ECC RDIMM Kit

This 384GB kit contains twelve 32GB DDR5 6400 modules built for the Supermicro H13DSH motherboard. Each module is a 288-pin Registered ECC RDIMM operating at 1.1V with CL52 latency. The kit targets administrators upgrading memory capacity in compatible Supermicro server platforms.

Full Population at Rated Speed

Twelve dual-rank 2Rx8 modules fill every slot while maintaining DDR5 6400 (PC5-51200) operation. Registered buffering offloads the memory controller so all slots run at full capacity without downclocking. ECC corrects single-bit errors on the fly to prevent silent data corruption in production workloads.

288-Pin Registered Form Factor

Modules use the 288-pin RDIMM layout required by the H13DSH; UDIMM or SODIMM alternatives will not fit. No heat spreaders are present, so airflow across the DIMMs must follow the chassis design. Buyers needing a different capacity, rank configuration, or non-ECC memory should look elsewhere.

Highlights

  • 384 GB total capacity from twelve 32 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency at 1.1 V for rated performance
  • Registered ECC RDIMM design corrects single-bit errors and offloads the memory controller
  • 2Rx8 dual-rank organisation matches the Supermicro H13DSH population rules exactly
  • 288-pin DDR5 RDIMM form factor fits the board's memory slots without adapters

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-328K12
Capacity384GB (12 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 12X32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

Will the 12 x 32 GB DDR5 6400 CL52 1.1 V RDIMMs populate every slot on my Supermicro H13DSH without speed down-negotiation?

The kit matches the board's DDR5 6400 PC5-51200 2Rx8 Registered ECC spec, so all twelve 288-pin slots can run at the rated 6400 MT/s with 1.10 V and CL52 timings.

How can I confirm the NEMIX RAM 384 GB kit is running at DDR5 6400 CL52 1.1 V after installation?

Enter the BIOS or use a tool such as dmidecode to verify each DIMM shows 6400 MT/s, CAS 52, 1.10 V, Registered ECC and 2Rx8 organisation.

Does the MR51200-328K12 package include only the twelve 32 GB RDIMMs or are any cables or brackets supplied?

The box contains exactly the twelve 32 GB DDR5 6400 288-pin ECC Registered RDIMMs; no cables, brackets or extra hardware are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.