SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
A 384 GB registered ECC DDR5 kit with four 96 GB modules at 4800 MT/s, CL40, 1.1 V, 2Rx8, 288-pin RDIMM for Thinkmate VSX-R5-760RTP7 workstations
This NEMIX RAM kit provides 384 GB of DDR5 4800 registered ECC memory in four 96 GB modules. The DIMMs run at 1.1 V with CL40 latency and use a 288-pin RDIMM form factor. They are validated for the ThinkMate VSX-R5-760RTP7 workstation.
Administrators expanding a ThinkMate VSX-R5-760RTP7 to its maximum supported capacity will match the platform's registered ECC requirement. Systems that accept only unbuffered non-ECC DDR5 or that limit DIMM density below 96 GB cannot use this kit.
The single specification that decides fit is the 384 GB kit size delivered as four 96 GB registered ECC modules. If the target platform cannot address this density or requires a different module count, the kit will not be compatible.
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-9628K4 |
| Capacity | 384GB (4 x 96GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | THINKMATE |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 384GB (4X96GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Yes, the kit uses 288-pin DDR5 RDIMM form factor which matches the workstation's registered DIMM slots for direct installation.
Install the four 96GB modules in the channel sequence shown in the system manual; registered DIMMs require correct slot population for the memory controller to train at 4800 MT/s.
The DRAM chips are fixed components; no firmware updates apply and the modules carry a lifetime replacement warranty if a defect appears.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?