We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 ECC RDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 384GB (4x96GB) DDR5 5600 CL46 ECC RDIMM Dell PowerEdge XE9780L/XE9785L memory upgrade

SKU CH-00R1-XE6VW

384 GB DDR5 5600 ECC registered kit in four 96 GB modules for Dell PowerEdge XE9780L and XE9785L servers

  • Capacity384GB (4 x 96GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 384 GB capacity with four 96 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • ECC registered design for data integrity
  • 1 V operation reduces power draw
  • Validated for Dell PowerEdge XE9780L and XE9785L

Dell PowerEdge XE9780L and XE9785L upgrade

This 384GB kit contains four 96GB DDR5 5600 registered ECC modules built for the Dell PowerEdge XE9780L and XE9785L rack servers. It targets administrators who need maximum memory capacity in those specific platforms.

Registered ECC with 2Rx4 organisation

The modules use a registered design with on-die ECC and a 2Rx4 rank structure, allowing the memory controller to address 384GB across four slots while maintaining signal integrity at 5600 MT/s. No heat spreaders are included.

DDR5 5600 CL46 at 1.1 V

The kit runs at DDR5 5600 (PC5-44800) with a CAS latency of 46 and a standard 1.1 V operating voltage. Buyers whose servers require a different speed grade, voltage or rank configuration cannot use this kit.

Highlights

  • 384 GB capacity with four 96 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • ECC registered design for data integrity
  • 1 V operation reduces power draw
  • Validated for Dell PowerEdge XE9780L and XE9785L

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K4
Capacity384GB (4 x 96GB)
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB (4 x 96GB) DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

Will the ECC RDIMM modules need replacement once the server reaches its maximum supported capacity?

The kit provides 384 GB across four 96 GB modules using 288-pin DDR5 RDIMM form factor. If the platform supports additional slots you can add more kits; otherwise the installed modules remain in service for the life of the system.

What limits sustained throughput when the memory runs continuously at 5600 MT/s?

The CL46 latency at 5600 speed sets the timing boundary for sustained workloads; registered buffering and ECC overhead are fixed by the module design.

How much heat and power should I expect from the four modules operating all day at 1.1 V?

Each module runs at 1.10 V without a heat spreader; total power draw scales with the 384 GB capacity and 5600 data rate under load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.