We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules without heat spreaders in a kit

NEMIX RAM

NEMIX RAM 384GB (4x96GB) DDR5-6400 CL52 1.1V ECC Registered RDIMM Kit for Supermicro X14DBG-LC+

SKU CH-GZZN-ASYBZ

384 GB of DDR5 server memory in a four-module kit of 96 GB registered ECC RDIMMs rated at 6400 MT/s with CL52 latency and 1.1 V operation, validated for the Supermicro X14DBG-LC+ motherboard

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Show 3 more configurations
  • 384 GB total capacity from four 96 GB modules maximises server memory density
  • DDR5-6400 CL52 at 1.10 V delivers rated throughput for Supermicro X14DBG-LC+
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors automatically
  • 2Rx4 dual-rank organisation enables full population across all four slots at rated speed
  • 288-pin DDR5 form factor matches the motherboard's exact slot and population requirements

384GB DDR5 ECC RDIMM kit for Supermicro X14DBG-LC+

This 384GB kit contains four 96GB DDR5-6400 registered ECC modules built to the exact rank, voltage and timing the Supermicro X14DBG-LC+ memory controller expects. It targets administrators who need maximum supported capacity on this specific platform.

Replaces smaller or mixed-capacity DDR5 RDIMM sets

When a server runs below its supported limit or uses mismatched ranks, the memory controller may downclock or disable slots. Installing this matched 2Rx4 kit at 1.1V restores full-channel bandwidth and allows every slot to operate at the rated 6400 MT/s.

Fits 288-pin RDIMM slots on the validated

Registered buffering offloads the controller so all four modules run fully populated without signal degradation, while on-die ECC corrects single-bit errors before they reach the OS. No heat spreaders are included, so chassis airflow must cool the bare modules directly.

Highlights

  • 384 GB total capacity from four 96 GB modules maximises server memory density
  • DDR5-6400 CL52 at 1.10 V delivers rated throughput for Supermicro X14DBG-LC+
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors automatically
  • 2Rx4 dual-rank organisation enables full population across all four slots at rated speed
  • 288-pin DDR5 form factor matches the motherboard's exact slot and population requirements

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will these 288-pin RDIMMs fit the Supermicro X14DBG-LC+ memory slots?

Yes, the kit uses the exact 288-pin Registered DDR5 form factor that the X14DBG-LC+ requires; UDIMM or SODIMM modules will not fit.

What is the correct population order when installing all four 96GB modules?

Fill the slots in the sequence listed in the Supermicro X14DBG-LC+ manual — typically CPU1 channels first, then CPU2 — so the memory controller recognises the full 384GB at DDR5-6400.

Do the modules need any active cooling or thermal-pad replacement over time?

The RDIMMs ship without heat spreaders and run at the standard 1.1V; server chassis airflow is sufficient, so no thermal-pad maintenance is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.