NEMIX RAM 128GB (2x64GB) DDR5 6400 CL52 1.1V 4Rx4 ECC RDIMM for Supermicro X14DBG-LC+ memory upgrade
- 128GB (2 x 64GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
256 GB DDR5 6400 registered ECC RDIMM kit, four 64 GB modules at CL52 1.1 V, validated for Supermicro X14DBG-LC+ servers
Size 256GB 4X64GB
This 256GB kit (four 64GB modules) is built for the Supermicro X14DBG-LC+ motherboard. DDR5-6400 (PC5-51200) Registered ECC RDIMMs with 4Rx4 organisation and CL52 timing match the board's memory controller expectations precisely. The modules operate at 1.1V and use the 288-pin RDIMM form factor required by this platform.
Registered architecture buffers address and command signals, reducing electrical load on the memory controller when all slots are populated. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots. The 1.1V operating voltage aligns with the DDR5 standard for server memory. No heat spreaders are fitted on these modules.
The kit provides four RDIMMs that must be installed following the motherboard's population rules for full-capacity operation. Consult the system manual for supported capacities and approved DIMM order before installation. This memory is not compatible with boards requiring UDIMM or SODIMM form factors, nor with platforms that do not support Registered ECC DDR5.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-944K4 |
| Capacity | 256GB (4 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 4X64GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Power down, open the chassis, and insert each 288-pin module into the slots specified by the board manual; the step most people skip is verifying the exact population order for 4Rx4 DIMMs so the memory controller recognises the full 256 GB at 6400 MT/s.
No routine maintenance is required; the modules run at 1.1 V without heat spreaders, so keep airflow clean, and replace a stick only if ECC logs report uncorrectable errors or the system fails to post.
The memory controller's maximum supported rank-per-channel limit is reached before thermal throttling, so fully populating all slots with 4Rx4 modules caps total capacity at 256 GB and prevents adding more DIMMs.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?