We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 384GB (4x96GB) DDR5 6400 CL52 2Rx4 1.1V ECC RDIMM SuperMicro X14SBW-F memory upgrade

SKU CH-RNCZ-8K4NP

A 384 GB DDR5 ECC registered server kit with four 96 GB modules running at 6400 MT/s CL52 and 1.1 V for the SuperMicro X14SBW-F

  • Capacity384GB (4 x 96GB)
  • SpeedDDR5 6400 (PC5 51200)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 384 GB total capacity from four 96 GB modules
  • DDR5 6400 speed with CL52 latency for responsive server workloads
  • ECC registered RDIMM design protects data integrity in mission-critical systems
  • Low 1.1 V operation reduces power draw across dense memory configurations
  • Validated for SuperMicro X14SBW-F motherboard compatibility

System-Specific DDR5 Server Memory

This NEMIX RAM kit delivers 384GB across four 96GB DDR5 6400 RDIMM modules built for the SuperMicro X14SBW-F platform. Each stick runs at CL52 latency with a 1.1V operating voltage and registered ECC circuitry. The 2Rx4 organisation and 288-pin form factor match the board's memory architecture exactly.

Suited for SuperMicro X14SBW-F upgrades

Administrators expanding a single SuperMicro X14SBW-F server to its full 384GB capacity will find this kit validated for that chassis. Builders targeting a different motherboard, a workstation board, or a system that requires unbuffered DIMMs should select memory qualified for those platforms instead.

Sustained-load behaviour

Registered ECC modules maintain data integrity during continuous enterprise workloads by correcting single-bit errors on the fly. The 1.1V DDR5 voltage keeps power draw predictable while the registered buffer reduces electrical load on the memory controller during extended operation.

Highlights

  • 384 GB total capacity from four 96 GB modules
  • DDR5 6400 speed with CL52 latency for responsive server workloads
  • ECC registered RDIMM design protects data integrity in mission-critical systems
  • Low 1.1 V operation reduces power draw across dense memory configurations
  • Validated for SuperMicro X14SBW-F motherboard compatibility

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 6400MHZ ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K4
Capacity384GB (4 x 96GB)
SpeedDDR5 6400 (PC5 51200)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL52
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content384GB (4X96GB) DDR5 6400MHZ PC5-51200 2Rx4 1.1V CL52 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does this 384 GB kit require a SuperMicro X14SBW-F motherboard to operate?

Yes, the kit is validated for the SuperMicro X14SBW-F server board and uses 288-pin DDR5 RDIMM modules that fit that platform's memory slots.

Will the registered ECC design work with the X14SBW-F's memory controller without extra configuration?

The modules are DDR5 6400 CL52 2Rx4 registered ECC RDIMMs at 1.1 V, matching the X14SBW-F's supported memory type so the controller initialises them automatically.

How can I confirm the full 384 GB is recognised and running at 6400 MT/s after installation?

Check the system BIOS or UEFI memory information screen; it should show four 96 GB DIMMs, a total of 384 GB, DDR5 6400 speed and ECC active.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.