We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR4 RDIMM sticks in anti-static packaging

NEMIX RAM

NEMIX RAM 48GB (6x8GB) DDR4 3200 ECC RDIMM CL22 memory upgrade

SKU CH-N8Y3-V39VH

48 GB DDR4 3200 ECC registered server kit of six 8 GB modules at CL22 for ThinkMate high-density systems

  • Capacity48GB (6 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 48GB total capacity across six 8GB modules
  • DDR4 3200 speed with PC4-25600 bandwidth rating
  • ECC registered design protects data integrity in servers
  • CL22 latency at 1.2V for stable operation
  • 288-pin RDIMM form factor fits Thinkmate high-density systems

48GB DDR4 3200 ECC RDIMM Kit

This 48GB kit contains six 8GB DDR4 3200 registered DIMMs with ECC and a CAS latency of CL22. It is built for Thinkmate HDX-QT24 and HDX-QN24 high-density servers that require registered memory. The modules operate at 1.20V and use a 288-pin form factor.

Installation and Common Issues

The DIMMs install into standard 288-pin DDR4 RDIMM slots and are keyed to prevent backwards insertion. Servers often require specific slot population orders across multiple channels; ignoring the manual can leave capacity unrecognised. Mixing registered modules with unbuffered memory will prevent the system from booting.

DDR4 Registered Memory Limits

DDR4 registered DIMMs add a register clock cycle that increases latency compared to unbuffered modules. The CL22 timing at 3200 MT/s reflects this overhead. Maximum capacity per channel and total system memory are set by the server memory controller and BIOS, not by the modules themselves.

Highlights

  • 48GB total capacity across six 8GB modules
  • DDR4 3200 speed with PC4-25600 bandwidth rating
  • ECC registered design protects data integrity in servers
  • CL22 latency at 1.2V for stable operation
  • 288-pin RDIMM form factor fits Thinkmate high-density systems

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K6
Capacity48GB (6 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content48GB (6X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

How do I verify the 48GB DDR4 3200 ECC RDIMM kit is running at PC4-25600 CL22 after installation?

Enter the system BIOS or UEFI and confirm the memory speed reads 3200 MT/s, voltage shows 1.20 V and CAS latency is set to 22; the ECC status should also report as enabled.

What comes in the MR25600-818K6 package and is anything else required?

The box contains six 8 GB 288-pin DDR4 RDIMM modules for a total of 48 GB; no additional parts or cables are needed for installation.

Which capacity kit should I choose for a THINKMATE HDX-QT24-52E3 server?

This 48 GB (6 x 8 GB) DDR4 3200 ECC RDIMM kit matches the qualified configuration for the HDX-QT24-52E3, HDX-QN24-52E3 and HDX-QT24-32E3 high-density servers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.