We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR4 ECC RDIMM modules, no heat spreaders, 288-pin gold contacts

NEMIX RAM

NEMIX RAM 48GB (6x8GB) DDR4 3200MHz ECC RDIMM CL22 1.2V 288-Pin ThinkMate XS8-24S3

SKU CH-2EJE-BPAK5

A 48 GB DDR4 ECC registered memory kit of six 8 GB modules running at 3200 MHz with CL22 latency for ThinkMate XS8-24S3 workstations

  • Capacity48GB (6 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 48 GB capacity in a 6-module kit
  • DDR4 3200 MHz speed for high bandwidth
  • ECC registered design protects data integrity
  • 2 V operation lowers power draw
  • Validated for ThinkMate XS8-24S3 workstations

48GB DDR4 ECC RDIMM kit

This 48GB kit contains six 8GB DDR4 3200MHz ECC registered DIMMs built for ThinkMate XS8-24S3 workstations. Each module runs at 1.2V with CL22 latency and uses a 1Rx8 organisation. The registered design adds a buffer that stabilises heavy multi-module loads. System administrators upgrading memory in supported ThinkMate platforms will find the configuration matches the vendor-qualified specification.

Registered ECC with 1Rx8 organisation

The single specification that decides fit is the registered ECC RDIMM format combined with a 1Rx8 rank structure at DDR4 3200. Workstation motherboards that require registered modules with error correction will accept this kit; boards limited to unbuffered non-ECC UDIMMs will not. Mixing registered and unbuffered DIMMs prevents boot, so the existing memory type must match.

Thermals and power in normal use

Operating at 1.2V, the modules draw minimal power and run without heat spreaders, relying on chassis airflow for cooling. Registered DIMMs typically generate slightly more heat than unbuffered equivalents, but the low voltage keeps thermal output modest. No active cooling is required beyond standard server or workstation fan profiles.

Highlights

  • 48 GB capacity in a 6-module kit
  • DDR4 3200 MHz speed for high bandwidth
  • ECC registered design protects data integrity
  • 2 V operation lowers power draw
  • Validated for ThinkMate XS8-24S3 workstations

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K6
Capacity48GB (6 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content48GB (6X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

What does the 3200MHz speed mean when the modules are installed in a ThinkMate XS8-24S3?

The kit runs at DDR4 3200 (PC4-25600) with CL22 latency, delivering the rated throughput once the workstation enables the XMP or JEDEC profile in BIOS.

How does the registered ECC interface affect usable capacity and error handling?

Each 8 GB module is 1Rx8 registered ECC, so the memory controller buffers commands and corrects single-bit errors without reducing the 48 GB total.

What physical slot and clearance requirements apply to these 288-pin RDIMMs?

They need six standard DDR4 RDIMM slots; the modules have no heat spreader, so they fit in tight server chassis with normal DIMM spacing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.