We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 48GB DDR5 5600 CL46 2Rx8 ECC RDIMM H14SHM memory upgrade

SKU CH-RHDE-68TPQ

48 GB DDR5 5600 CL46 2Rx8 ECC registered RDIMM for Supermicro H14SHM servers

  • Capacity48GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • Exact-match 48 GB DDR5-5600 CL46 for full-rated speed
  • Registered ECC RDIMM prevents silent data corruption
  • 1 V operation lowers server power draw
  • 2Rx8 dual-rank layout maximises per-slot capacity
  • Validated for Supermicro H14SHM motherboard

48GB DDR5 ECC RDIMM for Supermicro H14SHM

This 48GB DDR5 5600 (PC5-44800) module is a registered ECC RDIMM built for the Supermicro H14SHM motherboard. It runs at 1.10V with CL46 latency and a 2Rx8 organisation. The 288-pin form factor matches the board's DIMM slots exactly.

Registered DDR5 population rules limit mixing

Registered architecture offloads the memory controller so every populated slot can run at full capacity. ECC corrects single-bit errors on the fly. The board's memory population order and maximum supported capacity per slot are defined by the manufacturer and must be followed.

Verify your H14SHM manual before ordering

Check the motherboard manual for approved DIMM population order, supported capacities per channel, and installation steps. This module is not a UDIMM or SODIMM and will not fit boards that require those form factors. Buyers needing non-ECC or unbuffered memory should look elsewhere.

Highlights

  • Exact-match 48 GB DDR5-5600 CL46 for full-rated speed
  • Registered ECC RDIMM prevents silent data corruption
  • 1 V operation lowers server power draw
  • 2Rx8 dual-rank layout maximises per-slot capacity
  • Validated for Supermicro H14SHM motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K1
Capacity48GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I pick the 48GB 2Rx8 kit or a different capacity for my Supermicro H14SHM?

The 48GB 2Rx8 kit matches the board's registered ECC requirement and runs at the rated 5600 speed with CL46 timing.

What does the 5600 speed rating deliver once the module is installed in the server?

It operates at DDR5 5600 (PC5-44800) with CL46 latency at 1.1V, giving the throughput the memory controller expects.

How does the 288-pin RDIMM interface affect maximum capacity and population rules on the H14SHM?

The registered 288-pin RDIMM form factor lets every slot run fully populated at full capacity while ECC corrects single-bit errors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.