We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips, no heat spreader, 288 gold edge connectors

NEMIX RAM

NEMIX RAM 48GB DDR5 5600MHz CL46 2Rx8 1.1V 288-Pin UDIMM for Supermicro X14SAE memory upgrade

SKU CH-4ZP6-RYH3A

48 GB DDR5 module running at 5600 MHz with CL46 latency and 1.1 V for the Supermicro X14SAE motherboard

  • Capacity48GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 48GB

  • 48 GB capacity for demanding workloads
  • DDR5 5600 speed for fast data throughput
  • CL46 latency with 1.1 V operation for efficient performance
  • 2Rx8 288-pin UDIMM form factor fits Supermicro X14SAE exactly
  • Built with Samsung, Micron or Hynix chips for tested reliability

Exact-Match Upgrade for Supermicro X14SAE

This 48GB DDR5 UDIMM runs at 5600MHz with CL46 latency and 1.1V operation. The 2Rx8 unbuffered non-ECC module matches the memory controller requirements of the Supermicro X14SAE motherboard for immediate recognition at full rated speed.

Thermals Noise and Power Draw

Operating at the standard 1.1V DDR5 voltage the module draws minimal power without a heat spreader. Passive cooling relies on case airflow and the low-voltage design keeps thermal output low during sustained workloads.

What the Bundle Changes

The single 48GB DIMM fills one 288-pin slot leaving remaining slots available for future expansion. Major OEM chips from Samsung Micron or Hynix provide tested stability at the rated PC5-44800 specification.

Highlights

  • 48 GB capacity for demanding workloads
  • DDR5 5600 speed for fast data throughput
  • CL46 latency with 1.1 V operation for efficient performance
  • 2Rx8 288-pin UDIMM form factor fits Supermicro X14SAE exactly
  • Built with Samsung, Micron or Hynix chips for tested reliability

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-4828K1
Capacity48GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install this 48GB DDR5 5600MHz UDIMM in my Supermicro X14SAE and what slot order should I follow?

Align the notch on the 288-pin module with the key in the DDR5 slot, press firmly until the retention clips click, then check your motherboard manual for the exact DIMM population sequence required for 2Rx8 modules.

Will this non-ECC unbuffered memory need any firmware updates or component swaps during its service life?

No firmware updates are required for the memory itself; the Samsung, Micron or Hynix DRAM chips and the 1.1V JEDEC specification are fixed, so only a motherboard BIOS update might be needed for compatibility.

What thermal or stability limit appears first when this CL46 2Rx8 kit runs at 5600MT/s under continuous load?

The rated 1.1V operating voltage and CL46 latency define the JEDEC stability envelope; sustained heavy workloads will hit the DDR5 controller's thermal-throttling point before the modules exceed their specified timing budget.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.