We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with gold edge connector and black memory chips no heat spreader

NEMIX RAM

NEMIX RAM 48GB DDR5 6400 CL52 2Rx8 1.1V ECC RDIMM memory upgrade for Supermicro H13DSH

SKU CH-ATGW-YW4BY

48GB DDR5 6400 registered ECC RDIMM with CL52 latency and 1.1V operation, validated for Supermicro H13DSH motherboards

  • Capacity48GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 48 GB capacity lets your server handle larger workloads
  • DDR5 6400 speed delivers rated throughput for demanding applications
  • CL52 latency and 1.1 V operation match the memory controller expectations
  • 2Rx8 registered ECC design enables full-slot population with error correction
  • 288-pin RDIMM form factor fits the Supermicro H13DSH motherboard exactly

Exact-fit 48 GB DDR5 RDIMM for Supermicro H13DSH

This 48 GB DDR5-6400 module matches the Supermicro H13DSH memory controller with CL52 timing, 1.1 V operation and 2Rx8 registered ECC architecture. It is built for servers that require full-capacity recognition and error correction at rated speed.

Simple slot installation with population rules

The 288-pin RDIMM seats in the standard DDR5 DIMM slots, but the motherboard manual defines the supported capacities and required population order. Skipping those rules can leave capacity unseen or force the system to run at reduced speeds.

48 GB per module handles heavy virtualization

Registered buffering offloads the controller so every populated slot runs at the full 48 GB, while ECC corrects single-bit errors before they corrupt data. Applications that exceed per-slot limits or need unbuffered UDIMM form factors cannot use this module.

Highlights

  • 48 GB capacity lets your server handle larger workloads
  • DDR5 6400 speed delivers rated throughput for demanding applications
  • CL52 latency and 1.1 V operation match the memory controller expectations
  • 2Rx8 registered ECC design enables full-slot population with error correction
  • 288-pin RDIMM form factor fits the Supermicro H13DSH motherboard exactly

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-4828K1
Capacity48GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

How can I verify the module is running at 6400 speed with CL52 after installation?

Check the BIOS memory information screen or use a tool such as CPU-Z; the SPD should report DDR5-6400 (PC5-51200) with a CAS latency of 52 at 1.1 V.

What exactly ships in the box and is anything else required?

The package contains one 48 GB 288-pin DDR5 ECC registered RDIMM; no heat spreader, cables or additional parts are included or needed for installation.

Should I choose the 48 GB 2Rx8 version or a different capacity for the Supermicro H13DSH?

This 48 GB 2Rx8 RDIMM matches the board's validated population rules; consult the motherboard manual for approved capacities and slot order before selecting a different size.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.