We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 204-pin SODIMM memory upgrade

SKU CH-5013-QBB6P

4 GB DDR3 SODIMM running at 1333 MHz with CL9 latency for POSIFLEX XT-3915 terminals

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX XT-3915 JIVA fanless POS terminals
  • 4GB DDR3 1333 PC3-10600 204-pin SODIMM module
  • Non-ECC unbuffered 2Rx8 CL9 for stable operation
  • Major OEM Samsung, Micron or Hynix chipset used
  • Low 1.35V voltage reduces power draw

POSIFLEX POS Terminal Memory

This 4 GB DDR3 SODIMM is built for the POSIFLEX XT-3915 JIVA fanless point-of-sale terminal. It fits the 204-pin slot and runs at DDR3 1333 (PC3-10600) with CL9 latency. The unbuffered, non-ECC design matches the original system specification.

Sustained Load Behaviour

Modules are stress-tested under load before shipping to verify stability during continuous operation. The 2Rx8 organisation and major OEM chips from Samsung, Micron or Hynix maintain data integrity over long shifts. Voltage is rated at 1.35 V and 1.50 V for consistent delivery.

Thermals Noise and Power

No heat spreader is fitted, relying on the terminal's fanless chassis airflow for cooling. Low-voltage DDR3 operation keeps power draw minimal in the compact enclosure. Silent running is assured with no moving parts on the module itself.

Highlights

  • Designed for POSIFLEX XT-3915 JIVA fanless POS terminals
  • 4GB DDR3 1333 PC3-10600 204-pin SODIMM module
  • Non-ECC unbuffered 2Rx8 CL9 for stable operation
  • Major OEM Samsung, Micron or Hynix chipset used
  • Low 1.35V voltage reduces power draw

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Does the 1.35 V DDR3 SODIMM run cooler than a standard 1.50 V module in a fanless POS terminal?

The module is rated at 1.35 V, which is lower than the standard 1.50 V DDR3 voltage, so it draws less power and generates less heat — helpful in a fanless chassis like the POSIFLEX XT-3915.

My POSIFLEX XT-3915 has a single 204-pin DDR3 slot — is this 4 GB stick the only part I need to reach 4 GB total?

Yes, the kit is a single 4 GB 204-pin DDR3 SODIMM; if your terminal has one free slot, inserting this module adds 4 GB with no extra parts required.

Will this CL9 1333 MHz SODIMM work alongside the original memory already installed in my POSIFLEX XT-3915?

The module runs at DDR3 1333 (PC3-10600) with CL9 timing; matching those specs to the factory-installed stick gives the best chance of stable dual-channel or single-channel operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.