We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 4GB DDR3 1333MHz PC3-10600 1.35V 204-Pin SODIMM memory upgrade

SKU CH-MSPG-HNZRG

4GB DDR3 1333MHz SODIMM module for POSIFLEX XT-5415IR terminals, 1.35V non-ECC unbuffered 204-pin format

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX XT-5415IR POS terminal
  • 4GB DDR3 1333MHz PC3-10600 CL9 module
  • Low-voltage 1.35V operation reduces power draw
  • 204-pin SODIMM fits compatible laptop and POS slots
  • Built with Samsung, Micron or Hynix chipsets

POSIFLEX POS terminal upgrade

This NEMIX RAM module is a 4GB DDR3 SODIMM built for the POSIFLEX XT-5415IR JIVA high-end IR touch fanless POS terminal. It targets technicians who maintain or expand memory in that specific point-of-sale platform.

204-pin DDR3 1333 PC3-10600

The decisive specification is the 204-pin DDR3 1333MHz PC3-10600 interface with 1.35V operating voltage and CL9 latency. Only systems designed for this exact SODIMM standard will recognise and run the module correctly.

Tool-free SODIMM slot access

Installation requires opening the terminal chassis, locating the SODIMM slot and pressing the module in until the side clips latch. The most common issue is inserting the stick at the wrong angle or not seating it fully, which causes the terminal to fail POST.

Highlights

  • Designed for POSIFLEX XT-5415IR POS terminal
  • 4GB DDR3 1333MHz PC3-10600 CL9 module
  • Low-voltage 1.35V operation reduces power draw
  • 204-pin SODIMM fits compatible laptop and POS slots
  • Built with Samsung, Micron or Hynix chipsets

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

What does the 1333MHz speed mean when the module is installed in the POSIFLEX XT-5415IR terminal?

The module runs at 1333MHz with CL9 latency, delivering PC3-10600 bandwidth for the POS terminal's memory controller.

How does the 204-pin DDR3 SODIMM interface limit the upgrade?

The 204-pin DDR3 SODIMM slot only accepts DDR3 modules; the terminal cannot use other memory generations.

What physical space is needed to install this 204-pin SODIMM in the POSIFLEX XT-5415IR?

The 204-pin SODIMM fits the terminal's internal memory slot; no heat spreader is present so it clears standard latches.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.