We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 512GB (16x32GB) DDR5 4800 CL40 ECC RDIMM THINKMATE SuperServer 741P-TR 741P-TRT memory upgrade

SKU CH-G5TF-2T2DH

512 GB of DDR5 ECC registered memory in sixteen 32 GB modules running at 4800 MHz CL40 for ThinkMate SuperServer 741P-TR and 741P-TRT

  • Capacity512GB (16 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 512 GB total capacity from sixteen 32 GB modules
  • DDR5 4800 MT/s speed with CL40 latency
  • ECC registered design detects and corrects data errors
  • 10 V operating voltage reduces power draw
  • Validated for Thinkmate SuperServer 741P-TR and 741P-TRT

System-Specific DDR5 512GB Kit

This NEMIX RAM kit provides 512 GB of DDR5 ECC registered memory across sixteen 32 GB modules. It is built for THINKMATE SuperServer 741P-TR and 741P-TRT tower platforms that require registered RDIMM modules. The kit delivers PC5-38400 speed at CL40 latency with a 1.10 V operating voltage.

Suited For Enterprise Server Upgrades

This configuration suits administrators expanding memory capacity in the named THINKMATE SuperServer models where 1Rx4 registered DIMMs are qualified. It is not for systems that accept only unbuffered UDIMM modules, platforms that cannot address 512 GB total capacity, or builds that need a different module count to match their memory-channel topology.

16-Module 1Rx4 Registered Layout

The decisive specification is the sixteen-piece 1Rx4 registered DIMM arrangement, which must match the server's qualified memory population rules. Each module uses a 288-pin DDR5 interface at 4800 MT/s with ECC and operates at 1.10 V. Verify the platform's supported rank-per-channel limits and maximum DIMM count before ordering.

Highlights

  • 512 GB total capacity from sixteen 32 GB modules
  • DDR5 4800 MT/s speed with CL40 latency
  • ECC registered design detects and corrects data errors
  • 10 V operating voltage reduces power draw
  • Validated for Thinkmate SuperServer 741P-TR and 741P-TRT

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-314K16
Capacity512GB (16 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content512GB (16X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Does the Thinkmate SuperServer 741P-TR have enough DDR5 RDIMM slots to accept all 16 modules in this kit?

The kit contains 16 modules of 32 GB each for a total of 512 GB. The server must provide at least 16 DDR5 RDIMM slots to install the full set.

Will the server run the memory at DDR5 4800 speeds if I populate all 16 slots with these CL40 1Rx4 RDIMMs?

Each module is rated DDR5 4800 (PC5-38400) CL40 at 1.10 V. The platform memory controller and BIOS determine the final speed when fully populated.

How can I confirm the 512 GB kit is detected and running with ECC after installation?

Enter the BIOS or UEFI and check the memory information screen for 512 GB total, DDR5 4800 speed, and ECC enabled status.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.