SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
A 512 GB DDR5 server kit of four 128 GB registered ECC RDIMMs running at 4800 MT/s with CL40 latency for compatible Supermicro systems
This NEMIX RAM kit delivers 512 GB of DDR5 4800 memory in four 128 GB registered DIMMs. Each module operates at 1.1 V with CL40 latency and uses a 4Rx4 organisation. The 288-pin RDIMMs include ECC for error correction in server workloads. The kit is validated for Supermicro CloudDC SuperServer SYS-621C-TN12R, SYS-611C-TN4R and SYS-121C-TN2R systems.
Administrators expanding memory in the listed Supermicro CloudDC platforms can install this 512 GB kit to reach the highest supported density per channel. The registered design and ECC function maintain signal integrity and data accuracy under sustained load. Builders targeting consumer motherboards, workstations without registered DIMM support, or systems limited to lower-density modules should select a different memory type.
The 4Rx4 rank structure on each 128 GB DIMM determines how the memory controller addresses the array and affects maximum population rules. This organisation, combined with the 4800 MT/s speed and CL40 timing, is the critical specification for compatibility with the qualified Supermicro platforms. Verifying that the server memory controller supports 4Rx4 RDIMMs at this speed ensures the kit will function as intended.
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-744K4 |
| Capacity | 512GB (4 x 128GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 512GB (4X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Yes, they share the same DDR5 4800 speed, 1.1 V voltage, CL40 latency and 288-pin RDIMM form factor, so the memory controller will train them together at 4800 MT/s.
Enter the BIOS or use a tool like dmidecode; you should see 512 GB total, 4800 MT/s data rate, CL40 timings, 1.1 V and ECC status reported as enabled for each of the four 128 GB modules.
The package contains only the four 128 GB 288-pin DDR5 RDIMM modules; no heat spreaders, cables or mounting hardware are included.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?