We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM modules in anti-static packaging

NEMIX RAM

NEMIX RAM 576GB (12×48GB) DDR5 5600 CL46 ECC RDIMM memory upgrade

SKU CH-VET2-YZCQD

A 576GB kit of twelve 48GB DDR5 5600 CL46 registered ECC RDIMMs built for the GIGABYTE MZ33-CP1 motherboard

  • Capacity576GB (12 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 576GB 12X48GB

Show 24 more configurations
  • 576 GB total capacity from twelve 48 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput out of the box
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated channels
  • 1 V operation matches the motherboard specification for efficient power use
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 memory slots exactly

Exact-fit server memory kit

This 576GB kit contains twelve 48GB DDR5 5600 RDIMM modules rated at CL46 and 1.1V. Each module uses a 2Rx8 registered ECC design that matches the memory controller requirements of the GIGABYTE MZ33-CP1 motherboard.

Build integration

The 288-pin registered form factor is required by the target motherboard and will not fit UDIMM or SODIMM slots. Populating all twelve slots with these matched modules lets the board run at its rated DDR5 5600 speed without down-clocking.

Included accessories and software

The package supplies only the twelve memory modules; no heat spreaders, cables or configuration utilities are bundled. Buyers who need fewer modules, non-ECC memory or a different voltage should select another kit.

Highlights

  • 576 GB total capacity from twelve 48 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput out of the box
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated channels
  • 1 V operation matches the motherboard specification for efficient power use
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 memory slots exactly

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K12
Capacity576GB (12 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 12X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 576 GB kit run at the full 5600 MT/s when all 12 slots are populated on my GIGABYTE MZ33-CP1?

The kit is spec-matched to the MZ33-CP1 population rules; each 48 GB 2Rx8 RDIMM is recognised at DDR5-5600 with CL46 at 1.1 V when installed in the correct slot order.

How much heat do twelve 1.1 V DDR5 RDIMMs generate under continuous load?

Each module operates at 1.10 V without a heat spreader; registered buffering keeps per-DIMM power low, so typical server airflow handles the thermal load.

Does my MZ33-CP1 need a specific BIOS revision or CPU stepping to support 48 GB 2Rx8 RDIMMs?

Consult the motherboard manual for approved DIMM population order and any BIOS version requirements before installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.