We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 576GB (6x96GB) DDR5 4800 CL40 ECC RDIMM memory upgrade

SKU CH-MW8Y-SMT8H

Six 96 GB DDR5 4800 CL40 ECC registered DIMMs deliver 576 GB for ThinkMate GPX-XH20-28S4-8HGX servers

  • Capacity576GB (6 x 96GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • Massive 576 GB capacity for heavy server workloads
  • DDR5 4800 speed with PC5-38400 bandwidth for fast data throughput
  • ECC registered design detects and corrects memory errors automatically
  • Low 1.10 V operation reduces power draw in dense configurations
  • Validated for ThinkMate GPX-XH20-28S4-8HGX GPU-optimised servers

576GB DDR5 ECC RDIMM kit

This 576GB kit contains six 96GB DDR5 4800 CL40 registered DIMMs built for Thinkmate GPX-XH20-28S4-8HGX GPU-optimised servers. The modules operate at 1.10V and use a 2Rx8 organisation with ECC for data integrity. They target administrators who need maximum memory capacity in qualified server platforms.

Replaces lower-capacity DDR5 RDIMMs

Upgrading from smaller DDR5 registered modules is worthwhile when workloads exceed the current memory ceiling and the server board supports 96GB dual-rank DIMMs. The jump makes sense for virtualisation hosts, large in-memory databases or GPU compute nodes that can address the full 576GB. Systems limited to lower per-slot densities or slower speeds will not benefit.

Limited to DDR5 4800 registered ECC

The DDR5 4800 interface caps peak bandwidth at the PC5-38400 rate and requires a motherboard qualified for 288-pin registered ECC DIMMs at 1.10V. Unbuffered or non-ECC boards cannot use these modules. Latency is fixed at CL40 and the kit does not support higher data rates or overclocking profiles.

Highlights

  • Massive 576 GB capacity for heavy server workloads
  • DDR5 4800 speed with PC5-38400 bandwidth for fast data throughput
  • ECC registered design detects and corrects memory errors automatically
  • Low 1.10 V operation reduces power draw in dense configurations
  • Validated for ThinkMate GPX-XH20-28S4-8HGX GPU-optimised servers

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-9628K6
Capacity576GB (6 x 96GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content576GB (6X96GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does the 288-pin DDR5 RDIMM fit the memory slots in a ThinkMate GPX-XH20-28S4-8HGX server?

Yes, the 288-pin DDR5 RDIMM form factor matches the DIMM slots on the ThinkMate GPX-XH20-28S4-8HGX GPU-optimised server.

What is the correct order to install the six 96GB modules so the registered ECC memory initialises properly?

Populate the slots in the sequence shown in the server manual, usually filling one channel per CPU first; skipping a channel or mixing ranks prevents the registered buffer from training at 4800 MT/s.

When should the 2Rx8 Samsung, Micron or Hynix DRAM chips be replaced if ECC correctable errors start rising?

Replace modules once the platform logs show a sustained climb in correctable error counts, indicating the 2Rx8 DRAM is degrading beyond ECC recovery.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.