We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules, bare chips, no heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 64GB (2×32GB) DDR5 5600 CL46 1.1V ECC RDIMM 2Rx8 288-pin memory upgrade

SKU CH-2B32-PAC8Y

A 64 GB DDR5 registered ECC kit (2 × 32 GB) running at 5600 MT/s with CL46 latency and 1.1 V, validated for Supermicro server motherboards

  • Capacity64GB (2 x 32GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB dual-channel capacity for memory-intensive workloads
  • DDR5 5600 speed with CL46 latency for responsive data access
  • ECC registered design protects data integrity in critical applications
  • 1 V operation reduces power draw and thermal load
  • Validated for Supermicro B13DEE motherboard compatibility

SuperMicro DDR5 5600 ECC RDIMM Kit

This 64GB kit contains two 32GB DDR5 5600 registered ECC modules built for SuperMicro B13DEE motherboards. Each stick runs at 1.1V with CL46 latency and a 2Rx8 organisation, delivering 64GB of error-correcting capacity for server and workstation workloads.

Compatibility and limits

The modules suit administrators upgrading SuperMicro platforms that require registered DDR5 RDIMMs with ECC. Builders needing unbuffered UDIMMs, non-ECC memory or a different pin count should select a different product line.

Registered ECC RDIMM form factor

The 288-pin registered design with on-die ECC is the single specification that determines whether the motherboard can accept this kit; only systems wired for DDR5 RDIMM slots will post with these modules installed.

Highlights

  • 64 GB dual-channel capacity for memory-intensive workloads
  • DDR5 5600 speed with CL46 latency for responsive data access
  • ECC registered design protects data integrity in critical applications
  • 1 V operation reduces power draw and thermal load
  • Validated for Supermicro B13DEE motherboard compatibility

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR44800-328K2
Capacity64GB (2 x 32GB)
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank2Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (2X32GB) DDR5 5600MHZ PC5-44800 2Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

How much power does each 32 GB DDR5 5600 module draw at 1.1 V during sustained server workloads?

Each module operates at 1.10 V; DDR5 at this voltage typically draws only a few watts per stick under full load.

What motherboard features are required for this 2Rx8 ECC RDIMM kit to function?

A DDR5 server board with RDIMM support, ECC enabled in BIOS, and 288-pin slots — such as the SuperMicro B13DEE — is required.

Will this 5600 MT/s kit run reliably in a system that currently uses 4800 MT/s DDR5 RDIMMs?

Yes; the modules will down-clock to 4800 MT/s and keep CL46 timing while maintaining ECC and registered operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.